[+] expand

20" Deep 12U Roto Shockmount Rolling Rack

Model: 3SKB-R12U20W

The Rolling Shockmount Case series incorporates our black powder coated twist latches with locking loops and low profile injection molded pull handle with a 20 inch deep tough shell. The molded design provides extra stiffness in...

Series:  20 Inch Deep Rolling Series
Interior Width: 19.00 in  (48.26 cm)
Interior Height:  21.00 in  (53.34 cm)
Rackable Depth:  20.00 in  (50.80 cm)
Rack Units Total:  12
The Rolling Shockmount Case series incorporates our black powder coated twist latches with locking loops and low profile injection molded pull handle with a 20 inch deep tough shell. The molded design provides extra stiffness in the lids and sides and allows for secure stacking. Rack depth front to rear rail is 20 inches and each lid is 2-1/4 inches deep. Doors are fully usable even when racks are stacked together. Elastomeric shocks protect even the heaviest of loads. Sliding retractable handle, ambient pressure relief valve, oversized snap-down handles on each side, roller blade wheels, and gasket protected front and rear doors are all standard equipment.
Features
  • Black powder coated twist latches with locking loops
  • Threaded steel rails
  • Rear rails
  • Built-in wheels
  • Shock and water resistant
  • Low profile pull handle
Specifications
  • Lid Depth:
  • Interior Width:
  • Interior Height:
  • Interior Cu. Volume:
  •  
  • Space Units Total:
  • Rackable Depth:
  • Depth Front Rail to Back Lid:
  •  
  • Exterior Cu. Volume:
  •  
  • Color
  •  
  • Carton Length:
  • Carton Width:
  • Carton Depth:
  • Carton Cu. Volume:
  •  
  • Product Weight:
  • Shipping Weight:
 
  • 2.25 in
  • 19.00 in
  • 21.00 in
  • 4.62 cu ft
  •  
  • 12
  • 20.00 in
  • 22.25 in
  •  
  • 14.83 cu ft
  •  
  • Black
  •  
  • 29.00 in
  • 31.00 in
  • 31.00 in
  • 16.13 cu ft
  •  
  • 67.95 lb
  • TBA
 
  • 5.72 cm
  • 48.26 cm
  • 53.34 cm
  • 0.13 cu m
  •  
  • 12
  • 50.80 cm
  • 56.52 cm
  •  
  • 0.42 cu m
  •  
  • Black
  •  
  • 73.66 cm
  • 78.74 cm
  • 78.74 cm
  • 0.46 cu m
  •  
  • 30.82 kg
  • TBA
Million Mile Guaranty

SKB Hard Case Products are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means, if your case breaks, SKB will repair or replace it at no cost to you for as long as you own the case. Most locks, handles and wheels have been made field replaceable and will be supplied to you at no charge. To request parts or a return authorization for damaged Industrial Cases and Racks, please contact our customer service department at (800) 783-0087. SKB Hard Cases are warranted for life to the original owner. Cases for rental purposes, modified or re-sold cases are not covered by this warranty.

Return Authorization Request
Original owners of SKB brand hardshell cases whose case is damaged and cannot be repaired with field replaceable parts may request a Return Authorization Number and instructions on returning the case to us. Please do not send damaged cases to us without a Return Authorization Number. We will repair or replace the damaged case at no cost to you. Contact our Customer Service Department through our Support Request form for detailed instructions. We may request that you email us a photo of your case to help identify the exact model. Repair usually takes about two weeks from the time we receive your case. SKB Cases pays for return shipping.

Frequently Asked Questions for 20 Inch Deep Rolling Series


Whom do I call for replacement parts?
Contact our Customer Service Department at 800-783-0087.

What do I have to do before I return my case or rack for repair?
Contact our Customer Service Department at 800-783-0087 for a Return Authorization Number.

Does a Warranty Card come with my case?
No warranty card is necessary. Just remember to keep your proof of purchase.

Where will I find my model number on my case?
It is not on your case. You will find the number on your original proof of purchase receipt. That is why it important to keep your original receipt.

How long will a repair take?
Usually about two weeks from the time we receive your case.

Shock Absorber Kit
(3SKB-SA)
Rack Mount Hardware
(1SKB19-AC1)
Shipping Label Plate
(3SKB-SLP)
 
No revisions on file.