Roto GigRig

1SKB19-R1010 Roto GigRig by SKB Industrial Shipping Cases

Roto GigRig

1SKB19-R1010

Category:

Rack Systems

Series:
Specialty & GigRigs

Roto Molded ergonomic design with ten space rackmount with a conveniently angled top for mixing board and 10 space rackmount below. Roto molded rock solid with improved locking systems. Lids, front panel and much larger rear access panel lift apart and re-assemble more securely. With convenient locking wheels.

•
Top is (10U) angled rackmount rails + 6" in rear for cables

•
(10U)rackmount on the bottom

•
5 inch locking wheels

•
Improved Locking Covers

•
Rock Solid yet very light construction

The GigRig in use as part of a military classroom training simulator

	Features
	ATA Rated
	Built-in Wheels or Casters

	Process
	Roto Molded

	Material
	LLDPE / LMDE

WEIGHT
Shipping Weight	64.00 lb	29.03 kg
Product Weight	39.40 lb	17.87 kg
INSIDE DIMENSIONS
Interior Width	19.00 in	48.26 cm
Interior Height	17.50 in	44.45 cm
Interior Cu. Volume	3.27 cu ft	0.09 cu m
Rack Space Units Total	20	20
Rack Space Units Top	10	10
Rack Space Units Bottom	10	10
Rack Depth Rail to Rail	17.00 in	43.18 cm
Rack Depth Front Rail to Back Lid	17.00 in	43.18 cm
OUTSIDE DIMENSIONS
Exterior Depth	23.75 in	60.33 cm
Exterior Width	24.25 in	61.60 cm
Exterior Height	29.00 in	73.66 cm
Exterior Cu. Volume	9.67 cu ft	0.27 cu m
OTHER PROPERTIES
Color	Black	Black

Dimensions are for reference only. Some models may be pictured on this page and elsewhere with optional accessories or equipment that are not included. All measurement tolerances are +/- 0.25 inches. Please consult with a SKB industrial product specialist at (800) 783-0087 if you need assistance or additional information. We are here to help. Product specifications are subject to change without notice. For cases that we note as accepting TSA Latches, contact SKB Industrial Support for availability before order.

no revisions on file


	Mini GigRig 6U Base with wheels (The RotoRoller) 1SKB-1906		GigWing 1SKB-1818
	Rack Mount Hardware 1SKB19-AC1
			Pictures & Full Descriptions »


	12U Pop-up Rack 1SKB19-P12		The Mighty '07 GigRig 1SKB19-R1406
	The Mighty GigRig Expander 1SKB19-REX6		Roto Mini GigRig 1SKB19-R1006
	Roto Mini GigRig with Pop-Up Rack 1SKB19-R1006V		Roto GigRig with Pop-Up Rack 1SKB19-R1010V
	GigSafe 1SKB19-R1400		Studio Flyer 2U 1SKB19-RSF2U
	Studio Flyer 4U 1SKB19-RSF4U		Computer Based Audio / Video Control and Presentation Case 1SKB-R104
	Computer Based Audio / Video Control and Presentation Case 1SKB-R106		Roto Molded Rack Expansion Case w/wheels 1SKB-R1906
	Gig Rig 1SKB19-R1208

Dimensions of all SKB Industrial Products
(PDF) 981.4 KB

Industrial / Military Dimensions
(PDF) 327.1 KB

Million Mile Guaranty

SKB Hard Case Products are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means, if your case breaks, SKB will repair or replace it at no cost to you for as long as you own the case. Most locks, handles and wheels have been made field replaceable and will be supplied to you at no charge. To request parts or a return authorization for damaged Industrial Cases and Racks, please contact our customer service department at (800) 783-0087. SKB Hard Cases are warranted for life to the original owner. Cases for rental purposes, modified or re-sold cases are not covered by this warranty.

Return Authorization Request
Original owners of SKB brand hardshell cases whose case is damaged and cannot be repaired with field replaceable parts may request a Return Authorization Number and instructions on returning the case to us. Please do not send damaged cases to us without a Return Authorization Number. We will repair or replace the damaged case at no cost to you. Contact our Customer Service Department at aaleman@skbcases.com for instructions. We may request that you email us a photo of your case to help identify the exact model. Repair usually takes about two weeks from the time we receive your case. SKB Cases pays for return shipping.

Frequently Asked Questions for Specialty & GigRigs

	What is a Rack Space or Rack Unit?
	A standard Rack Unit is 1.75 inches (4.445 cm) in height.
	Whom do I call for replacement parts?
	Contact our Customer Service Department at 800-783-0087.
	What do I have to do before I return my case or rack for repair?
	Contact our Customer Service Department at 800-783-0087 for a Return Authorization Number.
	What is the weight for the GigWings and how much will they hold?
	Each GigWing weighs 5.5 lbs. (2.49 kg) and will hold up to 50 lbs. (22.68 kg).
	Does a Warranty Card come with my case?
	No warranty card is necessary. Just remember to keep your proof of purchase.
	Where will I find my model number on my case?
	It is not on your case. You will find the number on your original proof of purchase receipt. That is why it important to keep your original receipt.
	How long will a repair take?
	Usually about two weeks from the time we receive your case.

News for Specialty & GigRigs

	06/18/2008	Larger 4U Model Joins the Studio Flyer Line

	10/16/2008	SKB Studio Flyer Hits the Road for Presidential Debates

related terms

gig rig