Computer Based Audio / Video Control and Presentation Case

1SKB-R106 Computer Based Audio / Video Control and Presentation Case by SKB Industrial Shipping Cases

Computer Based Audio / Video Control and Presentation Case

1SKB-R106

Category:

Rack Systems

Series:
Specialty & GigRigs

The 1SKB-R106 is a 10U slanted top and 6U front, rack case that feaatures steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the new 1SKB0-AV8 Retractble Shelf. The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front and rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear.

Two TSA locking SKB patented trigger latches secure the lid while the flat hard top allows for stacking while in transport and storage.

The 1SKB-AV8 8 is an 8U retractable shelf designed after our AV-14 (a 1SKB19-R1406 Mighty GigRig accessory). Not only is the AV-8 a great accessory/add-on for the 1SKB-R106, but also can be mounted to any slant top mixer type case with at least 8U of rack space, including our 1SKB-82DJ, 1SKB-84DJ anad 1SKB-106DJ products. The AV-8 is the perfect solution for a laptop or projector.

•
10U Slanted rackmount on top

•
6U rackmount in front

•
Steel threaded rails

•
Hard lid and doors

•
Side access ports for cable routing

•
Injection molded front and rear doors and lid

•
Two TSA locking patented trigger latches

•
Stackable for storage and transport

WEIGHT
Shipping Weight	29.70 lb	13.47 kg
Product Weight	25.75 lb	11.68 kg
Rack Space Units Top	10	10
Rack Space Units Bottom	6	6
OUTSIDE DIMENSIONS
Exterior Cu. Volume	6.72 cu ft	0.19 cu m

Dimensions are for reference only. Some models may be pictured on this page and elsewhere with optional accessories or equipment that are not included. All measurement tolerances are +/- 0.25 inches. Please consult with a SKB industrial product specialist at (800) 783-0087 if you need assistance or additional information. We are here to help. Product specifications are subject to change without notice. For cases that we note as accepting TSA Latches, contact SKB Industrial Support for availability before order.

no revisions on file


	no accessories listed


	12U Pop-up Rack 1SKB19-P12		The Mighty '07 GigRig 1SKB19-R1406
	The Mighty GigRig Expander 1SKB19-REX6		Roto Mini GigRig 1SKB19-R1006
	Roto Mini GigRig with Pop-Up Rack 1SKB19-R1006V		Roto GigRig 1SKB19-R1010
	Roto GigRig with Pop-Up Rack 1SKB19-R1010V		GigSafe 1SKB19-R1400
	Studio Flyer 2U 1SKB19-RSF2U		Studio Flyer 4U 1SKB19-RSF4U
	Computer Based Audio / Video Control and Presentation Case 1SKB-R104		Roto Molded Rack Expansion Case w/wheels 1SKB-R1906
	Gig Rig 1SKB19-R1208

Dimensions of all SKB Industrial Products
(PDF) 981.4 KB

Industrial / Military Dimensions
(PDF) 327.1 KB

Million Mile Guaranty

SKB Hard Case Products are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means, if your case breaks, SKB will repair or replace it at no cost to you for as long as you own the case. Most locks, handles and wheels have been made field replaceable and will be supplied to you at no charge. To request parts or a return authorization for damaged Industrial Cases and Racks, please contact our customer service department at (800) 783-0087. SKB Hard Cases are warranted for life to the original owner. Cases for rental purposes, modified or re-sold cases are not covered by this warranty.

Return Authorization Request
Original owners of SKB brand hardshell cases whose case is damaged and cannot be repaired with field replaceable parts may request a Return Authorization Number and instructions on returning the case to us. Please do not send damaged cases to us without a Return Authorization Number. We will repair or replace the damaged case at no cost to you. Contact our Customer Service Department at aaleman@skbcases.com for instructions. We may request that you email us a photo of your case to help identify the exact model. Repair usually takes about two weeks from the time we receive your case. SKB Cases pays for return shipping.

Frequently Asked Questions for Specialty & GigRigs

	What is a Rack Space or Rack Unit?
	A standard Rack Unit is 1.75 inches (4.445 cm) in height.
	Whom do I call for replacement parts?
	Contact our Customer Service Department at 800-783-0087.
	What do I have to do before I return my case or rack for repair?
	Contact our Customer Service Department at 800-783-0087 for a Return Authorization Number.
	What is the weight for the GigWings and how much will they hold?
	Each GigWing weighs 5.5 lbs. (2.49 kg) and will hold up to 50 lbs. (22.68 kg).
	Does a Warranty Card come with my case?
	No warranty card is necessary. Just remember to keep your proof of purchase.
	Where will I find my model number on my case?
	It is not on your case. You will find the number on your original proof of purchase receipt. That is why it important to keep your original receipt.
	How long will a repair take?
	Usually about two weeks from the time we receive your case.

News for Specialty & GigRigs

	06/18/2008	Larger 4U Model Joins the Studio Flyer Line

	10/16/2008	SKB Studio Flyer Hits the Road for Presidential Debates