Accepts Optional Caster Kit
The 3SKB-CAST1, designed to fit our 3R Series Roto Molded Mil Standard Cases, is a high performance add-on caster kit made to withstand the toughest environments.
 Installation Guide
|
|
|
|
Accepts Optional Casters
The 3SKB-CAST, designed to fit our Roto X Shipping Case Series, are high performance add-on casters made to withstand the toughest environments.
|
|
|
|
Accepts TSA Latches
 Everyone has experienced today's airport check-in ritual. Frustrating, exhausting and unfortunately necessary. The design gurus at SKB once again lead the industry by designing cases that accept field installable TSA recognized locking latches as optional equipment. TSA latches allow the traveler to securely lock their cases and still allow airport security to perform a contents inspection, then simply re-lock the case. Painless, efficient, safe!
|
|
|
|
ATA Rated
 ATA (Air Transport Association) specification 300, category 1 is the highest standard for an airline transport container (a minimum of 100 common carrier trips). Category II has a minimum of 10 trips by air.
|
|
|
|
Built-in Pull Handle
Durable Injection molded retractable pull handle for easy manuerving.
|
|
|
|
Built-in Tow Handle
Sturdy Tow Handle for easy one-person manuerving.
|
|
|
|
Built-in TSA Latches
 Everyone has experienced today's airport check-in ritual. Frustrating, exhausting and unfortunately necessary. The design gurus at SKB once again lead the industry forward by incorporating exclusive TSA accepted and recognized locking latches on specialized products allowing for the traveler to securely lock their cases and still allow airport security to perform a contents inspection, then simply re-lock the case. Painless, efficient, safe!
|
|
|
|
Built-in Wheels or Casters
Includes either our 3SKB-CAST1 quick release 4" casters with mounting plates and hardare, or comes with heavy duty built-in wheels standard.
|
|
|
|
Cubed Foam
Layers of 1" thick foam 3/4" dye cut squares for customizing the interior.
|
|
|
|
Injection Molded
The process of taking plastic at room temperature, heating it to a fluid state, forcing the material into a cavity that is the negative shape of the desired product, allowing the material to solidify, then remove the part from the mold.
|
|
|
|
IP67
Military specification for protection against dust and against the effect of immersion between 15cm and 1m.
|
|
|
|
Layered Foam
Sheets of 1.4 pound density, 2" ether like ester (ELE) foam.
|
|
|
|
LLDPE / LMDE
Linear Low Density Polyethylene / Linear Medium Density Polyethylene plastic that is used in roto molding.
|
|
|
|
MIL-STD-648C
Military specification for automatic ambient pressure equalization valve.
|
|
|
|
MIL-STD-810F
Military specification for resistance to UV, solvents, corrosion, fungus and impact damage.
|
|
|
|
MIL-STD-C-4150J
Military specification for waterproof and water-vapor proof cases for transit and storage.
|
|
|
|
Padded Dividers
Polyester tricot dividers that can be customized to fit your needs.
|
|
|
|
PE
Polyethylene plastic sheets used in vacuum forming.
|
|
|
|
PP
Polypropylene Co-polymer used in injection molding.
|
|
|
|
Roto Molded
Process of forming powdered plastic in a large oven in aluminum molds that rotate on two axis to evenly melt and distribute the plastic giving an even density and strong corners.
|
|
|
|
Thermal or Vacuum Formed
Thermoforming is a collection of manufacturing methods that heat and form sheets of extruded plastic. Vacuum forming draws the heated sheet against the tool with the assistance of a vacuum.
|
|
|
|
|
|
|
Moisture resistant cases specified under Military Standards.