[+] expand

3U 30 Inch Deep Static Shock Rack

Model: 3RS-3U30-25B

SKB’s 30 inch 3RS Series Removable Shock Rack Transport cases are available in 3 sizes, 3U, 4U, and 5U. These Shock Racks are lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for ...

Interior Length: 36.50 in (92.71 cm)
Interior Width: 19.00 in (48.26 cm)
Interior Depth: 5.50 in (13.97 cm)
SKB’s 30 inch 3RS Series Removable Shock Rack Transport cases are available in 3 sizes, 3U, 4U, and 5U. These Shock Racks are lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment.

These Static Shock Racks are lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment.

The inner rack chassis is built of high strength/lightweight aluminum alloy extrusions with 11 gauge hot rolled carbon steel rack rails to meet EIA-310 standards. Shock and vibration mitigation is accomplished with eight (8) elastomeric isolators rated for a payload range of 40 lbs to 150 lbs in a standard configuration. Optional extended payload range of 160 to 300 pounds can be accommodated as a special order option. The interior frame and shocks provide adequate sway space for ambient air circulation and heat dissipation.

The 3RS 30”Series Static Shock Racks are 30” deep from rail to rail with a standard 19” rack width per ANSI/EIA-310-C specification and feature square-hole rack rails to accommodate either #10-32 US standard, or 6mm International standard cage nuts which are supplied with the cases.

Molded of LMDP Linear Medium Density Polyethylene plastic that meets or exceed MIL-STD 810G standards. The rugged roto-molded shell ensures industry leading strength and impact resistance. The standard COTS (commercial off the shelf) case comes with a 2” deep front lid and a 4.5” deep rear lid to accommodate rack gear that is longer than 24”, and edge casters to allow convenient case transport. Molded-in stacking ribs and lugs are designed to stack with competitive manufacturers cases. Black powder coated stainless steel hardware are recessed for protection is standard as well as 8 comfort grip spring loaded lift handles which allow for easy movement. An automatic pressure relief valve is another standard feature along with gasket sealed lids that include convenient lid hangers to store your lids when your equipment is in operation. Coupling straps are included for securing the racks together when stacked.

Standard color is Black, also available in Desert Tan or OD Green.

Features
  • Meets or Exceeds MIL-STD 810G
  • Standard payload range 40 to 150 lbs
  • Optional extended payload range 160 to 300 lbs.
  • Standard 19” Rack width per ANSI/EIA-310-C
  • Standard Rack depth 24” rail to rail
  • Square hole rack rails to accommodate either #10-32 US standard, or 6mm international standard cage nuts
  • 2” front lid, and 5” rear lid with edge casters standard, other options available
  • SKB’s Rugged roto-molded shell ensures industry leading strength and impact resistance
  • Molded in stacking ribs and lugs are designed to stack with competitive manufacturers cases
  • Black powder coated stainless steel hardware (standard) which are recessed for protection
  • 8 comfort grip spring loaded lift handles
  • Automatic pressure relief valve (standard)
  • Lid hangars (standard)
  • Case coupling straps (standard)
  • Reduced Footprint
  • Low Profile
  • Light Weight
  • Lifetime Warranty
Specifications
Interior Length
36.50 in
92.71 cm
Interior Width
19.00 in
48.26 cm
Interior Depth
5.50 in
13.97 cm
Exterior Length
45.03 in
114.38 cm
Exterior Width
28.80 in
73.15 cm
Exterior Depth
11.82 in
30.02 cm
Rack Space Units Total
3
3
Rack Depth Rail to Rail
30.00 in
76.20 cm
Rack Depth Front Rail to Back Lid
34.50 in
87.63 cm
Shipping Weight
55.00 lb
24.95 kg
Product Weight
50.40 lb
22.86 kg

Lifetime Warranty

SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. Electronic components in SKB brand hardshell pedalboard systems are warranted for five years from date of purchase. Soft cases and gig bags are warranted for one year from date of purchase. Foam is not covered by SKB’s warranty. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases used for rental purposes, used by institutions or schools, modified or used cases are not covered by this warranty.

What is a rack space?
A standard rack space is 1.75 inches (4.445 cm) in height and 19 inches (48.26 cm) in width. Rack spaces are commonly called "U" or "RU" as in 12U rack or 14RU mixer.

Do you make custom cases?
Yes. Minimum quantities are required. Contact our Music Division at 800-410-2024

How do I register my case or rack for the lifetime warranty?
You may register yourself as the original owner of the case or rack at SKB Music Division Product Registration.

How do I request replacement parts?
Original owners of SKB brand hardshell cases may order replacement parts online at no cost and with free shipping. To request field replaceable parts please visit the SKB Store for instructions. You will receive a discount code for use at the SKB Store equal to the online price of the replacement parts you need.

How long will a repair take?
A repair usually takes about two weeks from the time we receive your case.

Is it possible to update my older case with the new TSA latches?
No. Only newer SKB products are designed to accommodate this new latch. Older model cases can not be retrofitted.

What do I have to do before I return my case for repair?
Contact our Customer Service Department at customerservice@skbcases.com or 800-410-2024 for a Return Authorization Number. Please have the model number of the case on hand.

Where will I find my model number on my case?
It is not on your case. You will find the number on your original proof of purchase receipt.