Added To Cart
Model: 3i-261712HD8
The iSeries 3i-261712HD8 was designed to fit the Blackmagic Design ATEM Television Studio HD8 or HD8 ISO. The case interior features high quality foam that has been form cut to fit the switcher with a large additional pocket (measuring 22"x 8”x 4.875”) below for the power supply and other accessories.
Read More
The iSeries 3i-261712HD8 was designed to fit the Blackmagic Design ATEM Television Studio HD8 or HD8 ISO. The case interior features high quality foam that has been form cut to fit the switcher with a large additional pocket (measuring 22"x 8”x 4.875”) below for the power supply and other accessories.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810G), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).
Prop65 Information
This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer and birth defects or other reproductive harm. To understand why we must make this statement please click on the Prop 65 tab above. For more information on Prop 65, go to www.P65Warnings.ca.gov.
- Fit’s Blackmagic Design ATEM Television Studio HD8
- Large (22” x 8” x 4.875”) accessory pocket for power supply and other accessories
- Built-in pull handle and two inch wide wheels
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD 810G)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD 810G
- Automatic ambient pressure equalization value (MIL-STD 810G)
- Resistant to corrosion and impact damage
- Protected hinges with stainless steel pins
- Five patented "trigger release" Latches
- Adaptable for TSA locks
- Rubber over-molded cushion grip handles
- Oversized double grip carrying handle
Exterior
Hard
Built In Wheels or Casters
Yes
Product Weight
20 lb
9.07 kg
Exterior Length
28.625 in
72.71 cm
Exterior Width
20.25 in
51.44 cm
Exterior Height
13.5 in
34.29 cm
Carton Length
29.5 in
74.93 cm
Carton Width
20.5 in
52.07 cm
Carton Height
14 in
35.56 cm
Shipping Weight
22.69 lb
10.29 kg
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases that have been modified, previously owned, or used for rental purposes by institutions or schools are not covered by this warranty.
Chart of all SKB iSeries products and their dimensions.
You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.
For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.
SKB has been making cases since 1977. We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us at caprop65@skbcases.com
Model: 3i-261712HD8
The iSeries 3i-261712HD8 was designed to fit the Blackmagic Design ATEM Television Studio HD8 or HD8 ISO. The case interior features high quality foam that has been form cut to fit the switcher with a large additional pocket (measuring 22"x 8”x 4.875”) below for the power supply and other accessories.
Read More
The iSeries 3i-261712HD8 was designed to fit the Blackmagic Design ATEM Television Studio HD8 or HD8 ISO. The case interior features high quality foam that has been form cut to fit the switcher with a large additional pocket (measuring 22"x 8”x 4.875”) below for the power supply and other accessories.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810G), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).
Prop65 Information
This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer and birth defects or other reproductive harm. To understand why we must make this statement please click on the Prop 65 tab above. For more information on Prop 65, go to www.P65Warnings.ca.gov.
- Fit’s Blackmagic Design ATEM Television Studio HD8
- Large (22” x 8” x 4.875”) accessory pocket for power supply and other accessories
- Built-in pull handle and two inch wide wheels
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD 810G)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD 810G
- Automatic ambient pressure equalization value (MIL-STD 810G)
- Resistant to corrosion and impact damage
- Protected hinges with stainless steel pins
- Five patented "trigger release" Latches
- Adaptable for TSA locks
- Rubber over-molded cushion grip handles
- Oversized double grip carrying handle
Exterior
Hard
Built In Wheels or Casters
Yes
Product Weight
20 lb
9.07 kg
Exterior Length
28.625 in
72.71 cm
Exterior Width
20.25 in
51.44 cm
Exterior Height
13.5 in
34.29 cm
Carton Length
29.5 in
74.93 cm
Carton Width
20.5 in
52.07 cm
Carton Height
14 in
35.56 cm
Shipping Weight
22.69 lb
10.29 kg
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases that have been modified, previously owned, or used for rental purposes by institutions or schools are not covered by this warranty.
Chart of all SKB iSeries products and their dimensions.
You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.
For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.
SKB has been making cases since 1977. We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us at caprop65@skbcases.com