[+] expand

ATA .50 Cal Rifle Case

Model: 2SKB-6019

The ATA 50 Caliber Case is Perfect for all Barrett 50 Cal Rifles (e.g. Barrett m82a1, Barrett m107, Barrett m95, etc). It is made of a polyethylene molded shell with weather resistant 0-ring seal for moisture protection and features SKB's bumper protected patented trigger release latches and locking hasps for a customer supplied lock.

Interior Dimensions: 56.00" L x 17.00" W x 5.00" D

Color & Interior: Black / Custom

MSRP: $469.99 USD

SKB Corporation has developed a new case to accommodate 50 Caliber rifles and all of the gear that is needed for a day at the range. Perfect for all Barrett 50 Cal Rifles (e.g. Barrett m82a1, Barrett m107, Barrett m95, etc).

The new 2SKB-6019 ATA 50 Caliber Case is a polyethylene molded shell with weather resistant 0-ring seal for moisture protection and features SKB's bumper protected patented trigger release latches and locking hasps for a customer supplied lock.

The interior of the case measures 56" L x 17" W x 5" D and features a high density PE and convoluted foam interior for cushioned protection with three sets of nylon cinch strap tie downs for gun securement. SKB's design engineers even provided four sets of cinch strap tie downs to secure boxes of shells, extra clips and bi-pod with plenty of room to store extra gear when traveling to a shoot. Comfortable spring loaded handles and wide-tracking wheels provide for easy transport of your 50 caliber equipment. The case color runs through the material so scratches are invisible and the "poly" is impervious to all solvents, oils, fuels and acids.

This case also exceeds ATA specification 300 category 1, the highest standard for an airline transport container (a minimum of the 100 trips by air).

This case is covered under SKB's Unconditional Lifetime Warranty as well as the $1500 content coverage if your gun is damaged by the airlines.
Features
  • Perfect for all Barrett 50 Cal Rifles (e.g. Barrett m82a1, Barrett m107, Barrett m95, etc).
  • Airline Approved (ATA 300).
  • Polyethylene molded shell with weather resistant 0-ring seal.
  • SKB's bumper protected patented trigger release latches and locking hasps for a customer supplied lock.
  • High density PE and convoluted foam interior.
  • Four sets of cinch strap tie downs to secure boxes of shells, extra clips and bi-pods.
  • Comfortable spring loaded handles.
  • Wide-tracking wheels for easy transport.
  • Unconditional Lifetime Warranty.
  • $1500 Content Coverage.
Specifications
  • Interior Length:
  • Interior Width:
  • Interior Depth:
  • Carton Length:
  • Carton Width:
  • Carton Depth:
  • Shipping Weight:
 
  • 56.00"
  • 17.00"
  • 5.00"
  • 63.00"
  • 22.00"
  • 9.00"
  • 36.00 lbs
Unconditional Lifetime Warranty / Million Mile Warranty

SKB hard case products are fully warranted against defects in materials and craftsmanship for the lifetime of the case to the original owner. SKB will repair or replace any product found to be defective. SKB DOES NOT REPLACE CASES FOR DAMAGED HARDWARE. All locks, handles, and wheels have been made to be field replaceable, take just minutes to install, and will be supplied to you at no charge via US mail. Please contact our customer service department at (800) 654-5992 with any parts requests.

$1500 Content Coverage Warranty

Offered with all ATA-rated SKB Sports Hard Cases, no registration required. SKB will cover up to $1500 to repair or replace equipment damaged by a commercial airline carrier while secured in one of our ATA-rated cases. If your gear has been damaged on a flight, first file a claim with the airline (SKB recommends keeping copies of all documents related to your claim and taking pictures of damages whenever possible). Once the claim has been settled, submit it and related documents to SKB for review. SKB may provide up to $1500 to cover any outstanding cost above the airline's claim amount. For more information on this warranty program, please contact our customer service department at (800) 654-5992.

About SKB ATA Sport Cases

SKB ATA Sport Cases are crafted to exceed the ATA (Airline Transportation Association) specification 300, category 1 rating. This specification establishes a stringent standard for transport container design ensuring the product's ability to withstand a minimum of 100 trips by air. SKB ATA-rated cases are molded from ultra-high molecular weight polyethylene, the material specified by the U.S. military for cases and containers built to withstand the toughest field conditions imaginable.The case color runs through the material so scratches are invisible and the "poly" is impervious to all solvents, oils, fuels and acids. Every case detail is purposefully designed to optimize function. The molded-in configuration of bumpers and ribs are designed to absorb shock and vibration as well as provide protection for exposed hardware. The ribs give the case superior rigidity and create the unique male / female mating system for secure stacking. The aluminum valance on SKB cases provides a reliable "tongue and groove" closure and a neoprene "o-ring" gasket keeps out harmful moisture. Heavy-duty, die-cast locking latches are engineered for a lifetime of easy, smooth service. These quality latches are field replaceable and are guaranteed for the life of the case.

No downloads available.

No FAQs available for this product. You may visit our Questions & Answers section for general questions.

Wheel in housing (WL-01)
Black wheel in black plastic housing used on a variety of Sport cases.


For additional replacement parts information, please call us at 800.654.5992