Industrial and Military Config

Single Lid Cases

By Series

iSeries

rSeries

vSeries

TL Series

FP Series

Accessories (for Single Lid Cases)

Rack Cases

Custom Order

Fits 3i-0907-4 cases (will not fit in 3i-0907-6). Panel mounting rings enable attachment of an interface panel that's flush with the case rim, providing room for switches, buttons, ports, etc. Each kit comes with panel ring, drill jigs/templates, drill bit, rubber gasket, and mounting hardware.

See Downloads tab to access a dimensional drawing/template for this Panel Mounting Ring Kit.

Installation Instructions

Panel Ring Installation

SKB has teamed up with Think Tank Photo the premier photo/video bag and backpack company to design quality interiors that provide the best of both worlds: soft case adaptability with the unparalleled strength and durability people expect from SKB's versatile watertight, airline-tough cases.

The 5DV-201110TT fits iSeries 2011-10 cases and features a closed cell fitted foam liner and dividers that are wrapped in Nylex, with heavy duty hook-and-loop tabs to ensure a secure, custom fit of gear.

Standard black steel handles for 3R, 3i, and shock racks.

Document/card holder with clear plastic cover.

Fits 3i-1706 cases. Panel mounting rings enable attachment of an interface panel that's flush with the case rim, providing room for switches, buttons, ports, etc. Each kit comes with panel ring, drill jigs/templates, drill bit, rubber gasket, and mounting hardware.

Fits 3i-1309 cases. Panel mounting rings enable attachment of an interface panel that's flush with the case rim, providing room for switches, buttons, ports, etc. Each kit comes with panel ring, drill jigs/templates, drill bit, rubber gasket, and mounting hardware. 

Fits 3i-1610-5 cases (will not fit in 3i-1610-10). Panel mounting rings enable attachment of an interface panel that's flush with the case rim, providing room for switches, buttons, ports, etc. Each kit comes with panel ring, drill jigs/templates, drill bit, rubber gasket, and mounting hardware. 

Fits 3i-1711 cases. Panel mounting rings enable attachment of an interface panel that's flush with the case rim, providing room for switches, buttons, ports, etc. Each kit comes with panel ring, drill jigs/templates, drill bit, rubber gasket, and mounting hardware. 

Fits 3i-1717 cases. Panel mounting rings enable attachment of an interface panel that's flush with the case rim, providing room for switches, buttons, ports, etc. Each kit comes with panel ring, drill jigs/templates, drill bit, rubber gasket, and mounting hardware. 

Fits 3i-1813 cases. Panel mounting rings enable attachment of an interface panel that's flush with the case rim, providing room for switches, buttons, ports, etc. Each kit comes with panel ring, drill jigs/templates, drill bit, rubber gasket, and mounting hardware. 

Fits 3i-1914 cases. Panel mounting rings enable attachment of an interface panel that's flush with the case rim, providing room for switches, buttons, ports, etc. Each kit comes with panel ring, drill jigs/templates, drill bit, rubber gasket, and mounting hardware. 

Fits 3i-2015 cases. Panel mounting rings enable attachment of an interface panel that's flush with the case rim, providing room for switches, buttons, ports, etc. Each kit comes with panel ring, drill jigs/templates, drill bit, rubber gasket, and mounting hardware. 

Fits 3i-1209 cases. Panel mounting rings enable attachment of an interface panel that's flush with the case rim, providing room for switches, buttons, ports, etc. Each kit comes with panel ring, drill jigs/templates, drill bit, rubber gasket, and mounting hardware.

Fits 3i-2011 cases. Panel mounting rings enable attachment of an interface panel that's flush with the case rim, providing room for switches, buttons, ports, etc. Each kit comes with panel ring, drill jigs/templates, drill bit, rubber gasket, and mounting hardware.

Fits 3i-1510 cases. Panel mounting rings enable attachment of an interface panel that's flush with the case rim, providing room for switches, buttons, ports, etc. Each kit comes with panel ring, drill jigs/templates, drill bit, rubber gasket, and mounting hardware.

Fits 3i-1006 cases. Panel mounting rings enable attachment of an interface panel that’s flush with the case rim, providing room for switches, buttons, ports, etc. Each kit comes with panel ring, drill jigs/templates, drill bit, rubber gasket, and mounting hardware.

See downloads tab to access a dimensional drawing/template for this Panel Mounting Ring Kit.

Installation Video

The aluminum shipping label plate can be added to the exterior of Shock Racks, 3R Series and the 3i Series cases to adhere shipping labels or marking of products for inventory. The label measures 12" x 7" and can be mounted to any product for secure labeling. The installation kit is complete with stainless steel mounting screws rubber backed sealing washers and nylock nuts to maintain the watertight seal of the cases.

Downloads

If you own multiple iSeries black cases, it can be a problem telling them apart. You can now eliminate the guesswork by changing out the case handles to different colors to code your contents. Available in five colors, (BE) blue, (RD) red, (GN) green, (YW) yellow, and (OR) orange.

The 3i-HD73 Small Colored Handles are 4.875" long and accommodate the following iSeries cases: 3i-0806-3, 3i-1006-3, 3i-0907-4, 3i-0907-6, 3i-1309-6.

The 3i-HD80 Medium Colored Handles are 6.75" long and accommodate the following iSeries cases: 3i-1510-4, 3i-1510-6, 3i-1510-9, 3i-1515-6, 3i-1610-5, 3i-1610-10, 3i-1706-6, 3i-1711-6, 3i-1717-10, 3i-1717-16, 1813-7, 3i-1914-8, 3i-3614-6, 3i-3913-12

The 3i-HD80 Medium Colored Handles will also replace the 

 on the following cases: 3i-1914-8, 3i-2015-7, 3i-2015-10, 3i-2015-14, 3i-2215-8,3i-2217-10, 3i-2217-12, 3i-2222-12, 3i-2213-12, 3i-2317-14, 3i-2418-16, 3i-2615-10, 3i-2617-12, 3i-2620-13, 3i-2914-15, 3i-2918-10, 3i-2918-14, 3i-3016-10, 3i-3019-12, 3i-3614-6, 3i-4214-5, 3i-4217-7, 3i-4719-8, 3i-5014-6

If you own multiple iSeries black cases, it can be a problem telling them apart. You can now eliminate the guesswork by changing out the case handles to different colors to code your contents. Available in five colors (BE) blue, (RD) red, (GN) green, (YW) yellow, and (OR) orange.

The 3i-HD81 Large Colored Handles are 8.625" long and accommodate the following iSeries cases: 3i-1914N-8, 3i-2011-7, 3i-2011-8, 3i-2011-10, 3i-2015-7, 3i-2015-10, 3i-2015-14, 3i-2215-8, 3i-2217-8, 3i-2217-10, 3i-2217-12, 3i-2222-12, 3i-3016-10, 3i-3613-12, 3i-4214-5, 3i-4217-7, 3i-4909-6, 3i-5014-6

The 3i-HD81 Large Colored Handles will also replace the 

 on the following cases: 3i-1717-16, 3i-2421-7, 3i-5616-9, 3i-6018-8

Official Sponsor

Set your own combination and make airline travel secure and convenient with these Travel Sentry® Approved padlocks. Check out the Downloads tab for lock set instructions.

Using this Travel Sentry® Approved lock allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit 

Features a flexible shackle. Sold as a set of two.

Replacing your SKB trigger latches with TSA locking trigger latches is quick and easy with the 3i-TSA-3 Locking Latch Kit. Each kit includes 2 TSA locking latches, replacement pins and 2 keys that are quick and easy to install.

The 3i-TSA-3 Locking Latch Kit will accommodate all  iSeries cases except for the 3i-0702-1, 3i-0705-3, 3i-0806-3, 3i-0907-4, 3i-0907-6, 3i-1006-3, and 3i-1208-3.

Featuring Travel Sentry® Approved locks. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit 

Replacing your SKB trigger latches with TSA locking trigger latches is quick and easy with the 3i-TSA-1 Locking Latch Kit. Each kit includes 2 TSA locking latches, replacement pins and 2 keys that are quick and easy to install.

The 3i-TSA Locking Latch Kit will accommodate these 3i Series cases; 3i-0907-4B and the 3i-0907-6B.

Replacing your SKB trigger latches with TSA locking trigger latches is quick and easy with the 3i-TSA-2 Locking Latch Kit. Each kit includes 2 TSA locking latches, replacement pins and 2 keys that are quick and easy to install.

The 3i-TSA Locking Latch Kit will accommodate the older versions of 3i Series cases; 3i-1209-4B, 3i-1711-6B. 3i-1813-5B.  3i-1209-4, 3i-1711-6, and 3i-1813-5 sold after 2019 use the 3i-TSA-3

Installatoin Instructions

SKB's new 3i-PMCK Panel Mount Clip Kit is now available and will accommodate any size 3i Series case. The 3i-PMCK Panel Mount Clip Kit will secure a mounting panel of your choice for a convenient and finished appearance.

The 3i-PMCK kit is complete with 8 panel mounts that have pressed in brass inserts, O-ring seals, mounting screws, a drill guide and even the necessary drill bit for a quick and easy installation.

Features a rigid shackle. Sold as a set of two.

Set of four 4\ casters with screws designed as optional equipment for the Roto-X Shipping Case Series

Caster plate and wheel kit for 3R Series cases that do not come equipped with built-in pull handle and wheels.

Adjustable shoulder strap for all band and string cases except SKB-380 Sousaphone Case and SKB-544 Cello Case.