{"title":"Photo and Video","description":"\u003cp\u003ePhoto and video gear doesn’t survive on luck. Our rugged cases defend cameras, lighting, tripods, computers, and rack-mount systems from the beatings of production life.\u003cbr\u003e\u003c\/p\u003e","products":[{"product_id":"3i-1711-r5c","title":"iSeries Canon R5C Cinema Camera Case","description":"\u003cp\u003eThe iSeries 3i-1711-R5C features a custom, high-quality foam interior that’s form cut to accommodate the Canon R5C Cinema Camera with additional pockets for two LP-E6NH batteries, LC-E6 battery charger, RF24-70mm f\/2.8 L IS USM lens, Tascam CA-XLR2d-C Mic Adapter, and large accessory pocket. The accessory pocket measures 10.375” x 4.25” x 4” and is perfect for the power supply, an additional lens, cables, or other accessories. The lens slot was designed around the Canon RF24-70mm f\/2.8 L IS USM lens, but can fit other similar-sized lenses such as the Canon RF24-105mm. The lens cutout is 6.25” long. The width is 2.75” near the lens mount, 3.5” for the body of the lens and 4.125” for the lens hood section. The depth is 3.5” in the body of the lens and 3.75” where the lens hood goes on the lens reversed.\u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425077100843,"sku":"3i-1711-R5C","price":234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/45a280d9c334008edfa2c24a97ba95d812ffdd63-1200x611_07b1983e-3963-45d8-966f-da9d82efa35a.png?v=1761557071"},{"product_id":"iseries-sony-hxr-nx800-pxw-z200-camcorder-case","title":"iSeries Sony HXR-NX800 PXW-Z200 Camcorder Case","description":"\u003cp\u003eThe 3i-2011-10SN was designed to fit the Sony HXR-NX800 or PXW-Z200 Camcorder. The interior of the case is made from high quality EPE foam that holds the camera with or without the battery installed, and features additional space for the BC-U2A battery charger, PTD-FP1 data transmitter, two batteries, and four accessory compartments. The battery slots fit the BP-U35, BP-U70 or BP-U100 (using precut pull-out foam blocks). The accessory pocket measures 1.8” x 1.8” x 1.75” in the upper left of the case, 8.09” x 1.47” x 7.625” in the bottom left, 6” x 1.91” x 5.5” in the upper right, and 2.85” x 2.44” x 7.625” in the middle right side.\u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425075101995,"sku":"3i-2011-10SN","price":424.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/3ff19a64f8fb5b9ddacd82bc56e98851bc514266-1200x611_97a33f74-3bbc-40e9-8720-8780bb8d9bc7.png?v=1761556830"},{"product_id":"canon-xf605-case","title":"iSeries Canon XF605 Case","description":"\u003cp\u003eThe 3i-2011-10XF was designed to fit the Canon XF605 Pro Camcorder with a custom interior made from high quality ethafoam that holds the camera with or without the battery installed, along with additional space for the battery charger, two batteries, and two large accessory compartments. The battery slots fit the BP-A30 or BP-A60 (using tear-away foam sections), and the accessory pockets measure 8.5” x 1.75” x 6” and 4.25” x 2.25” x 7”.\u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425076412715,"sku":"3i-2011-10XF","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/8d7357ab427757888387754bbc29db734ef05631-1200x611_e5422254-1ac4-4e7d-a5e2-edd24555d31f.png?v=1761557008"},{"product_id":"iseries-1309-6-apple-vision-pro-case","title":"iSeries 1309-6 Apple Vision Pro Case","description":"\u003cp\u003eThis case was specifically designed to protect the Apple Vision Pro. The interior includes high quality closed cell Zote foam to hold the Vision Pro with space for the battery pack, as well as an accessory pocket measuring 4” x 4” x 3.75” to store the power adapter, charging cables, and other small accessories. The case also features a small cut out in the bottom of the accessory pocket for an Apple AirTag so you can track where the Vision Pro is during transport.\u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425075298603,"sku":"3i-1309-6AVP","price":224.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/a421bccef32c45164208acb5e15477a94d668403-1200x611_11c2ca41-e4d0-43b1-91c6-a6897c5aea1b.png?v=1761556863"},{"product_id":"tl-series-2411-case","title":"TL Series 2411 Case","description":"\u003cp\u003eThe 1SKB-R2411 Roto-Molded 24\" Tripod Case provides ideal protection for transporting professional tripods and other hardware.\u003c\/p\u003e\n\u003cp\u003eRoto-molded of rugged Linear Low Density Polyethylene, this case is designed with internal foam in the base and lid to keep equipment secure and protected. The case has internal dimension of 24\" tall with a diameter of 11\", and features a sturdy, high-tension slide release buckle with heavy-duty web straps for easy closure, room on both sides to adhere shipping labels, and two molded-in ergonomic carrying handles. This case comes with SKB's Lifetime Warranty.\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425083523371,"sku":"1SKB-R2411","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/15f9cc5a21a28c9f77ea4cb4d4a283e5c1627886-1200x611_eaa23ea5-7cc7-4729-9a1b-f0dcb494ded9.png?v=1761557261"},{"product_id":"v-series-5020-case","title":"vSeries 5020 Case","description":"\u003cp\u003eOur vSeries cases are designed specifically for the secure transport of mic stands, drum hardware, and similar equipment that require a durable, practical, and appropriately sized transport system. \u003c\/p\u003e\n\u003cp\u003eSKB vSeries cases feature vacuum-formed Polyethylene hard-shell construction, sturdy built-in wheels, cushioned rubber over-molded injection molded handles, oversized protective bumpers, and TSA recognized and accepted locking latches.\u003c\/p\u003e\n\u003cp\u003eThis case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org.\u003c\/p\u003e\n\u003cp\u003eAll vSeries cases are certified ATA (Air Transport Association) rated Specification 300, Category 1, the highest standard for an airline transport container, assuring a minimum of 100 common carrier trips.\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425082474795,"sku":"1SKB-H5020W","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/3d0e94bcce23b8919b801091d161db426eaefce5-1200x611_8d4dfca8-1a35-4402-aeb0-212b5a75cba4.png?v=1761557252"},{"product_id":"tl-series-3411-case","title":"TL Series 3411 Case","description":"\u003cp\u003eThe 1SKB-R3411W Roto-Molded 34\" Tripod Case provides ideal protection for transporting professional tripods, lighting stands, and other hardware.\u003c\/p\u003e\n\u003cp\u003eRoto-molded of rugged Linear Low Density Polyethylene, this case is designed with internal foam in the base and lid to keep equipment secure and protected. The case has internal dimension of 34\" tall with a diameter of 11\", and features a sturdy, high-tension slide release buckle with heavy-duty web straps for easy closure, room on both sides to adhere shipping labels, two molded-in ergonomic carrying handles, and in-line skate style wheels for easy transportation. This case comes with SKB's Lifetime Warranty.\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425084145963,"sku":"1SKB-R3411W","price":284.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/df65153c5814e86bfc9e9b70210c5fd35a6f9081-1200x611_a33514a7-c7fc-4dbb-9833-754062054762.png?v=1761557266"},{"product_id":"tl-series-5011-case","title":"TL Series 5011 Case","description":"\u003cp\u003eThe 1SKB-R5011W Roto-Molded 50\" Tripod Case provides ideal protection for transporting professional tripods, lighting stands, and other hardware.\u003c\/p\u003e\n\u003cp\u003eRoto-molded of rugged Linear Low Density Polyethylene, this case is designed with internal foam in the base and lid to keep equipment secure and protected. The case has internal dimension of 50\" tall with a diameter of 11\", and features a sturdy, high-tension slide release buckle with heavy-duty web straps for easy closure, room on both sides to adhere shipping labels, two molded-in ergonomic carrying handles, and in-line skate style wheels for easy transportation. This case comes with SKB's Unconditional Lifetime Warranty.\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425084768555,"sku":"1SKB-R5011W","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/5a3294cb39435d5139a4bd4eccb5aa2affa377df-1200x611_41d88a68-aa47-4527-a867-f8ae12fe1a43.png?v=1761557272"},{"product_id":"i-series-1309-6-blackmagic-design-pocket-cinema-camera-4-k-6-k-case","title":"iSeries 1309-6 Blackmagic Design Pocket Cinema Camera 4K\/6K Case","description":"\u003cp\u003eThis military-grade waterproof hard case was designed for photographers who just want to carry the essentials. The case interior features a custom cut, high-quality PE foam that provides space for a Blackmagic Design Pocket Cinema Camera 4K or 6K with lens attached, lens hood section, two lens slots, and an accessory compartment.  (NOTE - Does not fit the 6K Pro or 6K G2.  For those models please see our 3i-13096-6KP.)\u003c\/p\u003e\n\u003cp\u003eA removable section of foam will allow for a longer lens to remain attached to the camera. Each lens slot has three (3) half-inch removable rings to fit a variety of lenses. The size of each lens slot is 3\" in diameter and 4.5\" in depth, with all rings removed. The 3i-13096PC4K case provides the ultimate protection for essential photo gear and is backed by SKB's unsurpassed Lifetime Warranty.\u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425095876907,"sku":"3i-13096PC4K","price":184.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/a14b26aa132e4a3084f5a1653052d3605b88afdf-1200x611_b69635b2-7c92-4460-83ed-45c6e6e0a393.png?v=1761557371"},{"product_id":"i-series-1510-6-case","title":"iSeries 1510-6 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. \u003c\/p\u003e\n\u003cp\u003eStandard features include a molded-in hinge, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425104625963,"sku":"3i-1510-6B-E","price":129.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Cubed Foam","offer_id":51425104658731,"sku":"3i-1510-6B-C","price":159.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Layered Foam","offer_id":51425104691499,"sku":"3i-1510-6B-L","price":159.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers","offer_id":51425104757035,"sku":"3i-1510-6DT","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers and Lid Organizer","offer_id":51425104724267,"sku":"3i-1510-6DL","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/e06e864e6febfa3fe4d653989e3bf65a38553284-1200x611_3c41aa2b-f962-489b-9ff4-de0cc48f084d.png?v=1763038103"},{"product_id":"i-series-1510-6-roland-v-8-hd-hd-video-switcher-case","title":"iSeries 1510-6 Roland V-8HD HD Video Switcher Case","description":"\u003cp\u003eThe 3i-1510-6V8 features a high quality foam interior that has been form cut to fit the Roland V-8HD HD Video Switcher. There is a large accessory pocket (9.5\" x 4.375\" x 1.875\") located below the mixer to hold the power supply and other accessories.\u003c\/p\u003e\n\u003cp\u003eAll SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425105543467,"sku":"3i-1510-6V8","price":174.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/7b24056f5651a78d4bac13325d9d3f1574d27080-1200x611_46e61f8a-b57c-435c-8f4a-3d5fa04dd045.png?v=1761557480"},{"product_id":"i-series-1510-6-roland-vr-4-hd-av-mixer-case","title":"iSeries 1510-6 Roland VR-4HD AV Mixer Case","description":"\u003cp\u003eThe 3i-1510-6VR4 features a high quality foam interior that has been form cut to fit the Roland VR-4HD AV Mixer. There is a large accessory pocket (11.25\" x 6.75\" x 1.5\") located below the mixer to hold the power supply and other accessories.\u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425105609003,"sku":"3i-1510-6VR4","price":164.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/7453393576639c45e795bc46b13c3ee06b494995-1200x611_edbca7c0-7b5c-45cd-bc79-09267d67a251.png?v=1761557507"},{"product_id":"i-series-1510-6-canon-xa-11-camcorder-case","title":"iSeries 1510-6 Canon XA Camcorder Case","description":"\u003cp\u003eThe iSeries 3i-1510-6XA features a high quality foam interior that has been form cut to fit the Canon XA65, XA60, XA45, XA40, XA15, or XA11 camcorder with additional pockets for two batteries (either BP-820 or BP-828), two memory cards, power supply, and other accessories.\u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425105740075,"sku":"3i-1510-6XA","price":194.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/c29806b0246c1d2139f883256541c236d5676b89-1200x611_a018af85-b058-4024-954a-7853c7f9912c.png?v=1761557525"},{"product_id":"i-series-1706-6-blackmagic-design-atem-mini-extreme-extreme-iso-case","title":"iSeries 1706-6 Blackmagic Design ATEM Mini Extreme\/Extreme ISO Case","description":"\u003cp\u003eThe iSeries 3i-17066ATM features a custom foam interior that's been form cut to accommodate the Blackmagic Design ATEM Mini Extreme, ATEM Mini Extreme ISO, or ATEM SDI Extreme ISO with a large additional pocket (measuring 13\" x 4\" x 2.75\") below for the power supply and other accessories.\u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425108033835,"sku":"3i-17066ATM","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/0ceeabb50d4e091c1d30e2f9b8c43183e3057bce-1200x611_b987ad1e-c685-4775-afe0-d8be1f41fb50.png?v=1761557748"},{"product_id":"i-series-1510-9-case","title":"iSeries 1510-9 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. \u003c\/p\u003e\n\u003cp\u003eStandard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425107149099,"sku":"3i-1510-9B-E","price":129.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Cubed Foam","offer_id":51425107181867,"sku":"3i-1510-9B-C","price":159.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers","offer_id":51425107247403,"sku":"3i-1510-9DT","price":194.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers and Lid Organizer","offer_id":51425107214635,"sku":"3i-1510-9DL","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/a142829ca50edad0b00609c57c8b068b0da25837-1200x611_436f9df3-37b7-4438-b67d-b431e96e15b3.png?v=1763038079"},{"product_id":"i-series-2213-12-blackmagic-ursa-broadcast-camera-case","title":"iSeries 2213-12 Blackmagic URSA Broadcast G2 Camera Case","description":"\u003cp\u003eThe iSeries 3i-221312BKB was designed to fit the Blackmagic URSA Broadcast G2 Camera and accessories. The case interior features high quality PE foam that's been form cut to fit the camera with fiber converter attached. There are additional pockets for the studio fiber converter box, the URSA viewfinder, and small accessories. \u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425107869995,"sku":"3i-221312BKB","price":469.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/4cf07febe2126ae53f4fb74f12cc43ff1160b278-1200x611_4d352198-860b-4db9-ac27-d097b87510f6.png?v=1761557732"},{"product_id":"i-series-1813-5-laptop-case-w-sun-screen","title":"iSeries 1813-5 Laptop Case w\/ Sun Screen","description":"\u003cp\u003eThe 3i-18135SNSC laptop case includes a sun screen that stores in the lid and up to a 17\" laptop in the base. An accessory compartment is located under the laptop which is ideal for a power supply or an external hard drive. \u003c\/p\u003e\n\u003cp\u003eThe sunscreen includes a collapsible frame for secure storage. The bottom of the case features a built in 3\/8\" female thread which is reinforced by a heavy duty metal plate. Any light stand, tripod, or mic stand will work to support the case as long as it has or is adapted to a 3\/8\" male mount and can handle the weight of the laptop, case, and other accessories.\u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425108623659,"sku":"3i-18135SNSC","price":339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/92d5a025a0b7ddb0bdbc56a77da5625b4469cead-1200x611_e637b7de-a15c-4074-90c7-80208596ef39.png?v=1761557846"},{"product_id":"i-series-1914-n-8-case","title":"iSeries 1914N-8 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. \u003c\/p\u003e\n\u003cp\u003eStandard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425108820267,"sku":"3i-1914N-8B-E","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Cubed Foam","offer_id":51425108853035,"sku":"3i-1914N-8B-C","price":234.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers","offer_id":51425108885803,"sku":"3i-1914N-8DT","price":274.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/a3cf8ecc59cf90ab07912a5f12b1fa834d742019-1200x611_8a133cfe-bc52-4b1b-b749-18eb0175b5ed.png?v=1763038097"},{"product_id":"i-series-2424-10-mac-pro-tower-case","title":"iSeries 2424-10 Mac Pro Tower Case","description":"\u003cp\u003eThe 3i-2424-MACP has been designed especially to accommodate a Mac Pro Tower (2019 or later models), with room for a keyboard with numeric keypad, track pad 2, mouse, and all necessary cables. \u003c\/p\u003e\n\u003cp\u003eThis waterproof iSeries case features a virtually indestructible exterior and a custom precut, high quality XPE foam interior that provides the perfect fit and maximum protection for a Mac Pro Tower and accessories in transport. The case also comes standard with TSA-retrofittable Trigger Latch® System, built-in quiet-glide wheels, and an easy-to-operate one-button pull handle for optimal convenience and functionality.\u003c\/p\u003e\n\u003cp\u003eAll SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve, and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425108918571,"sku":"3i-2424-MACP","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/5437b55bfc106a6c58b8e1b212fec40af8a85624-1200x611_373692b3-c3ac-4153-80c9-46660fec56dc.png?v=1761557889"},{"product_id":"i-series-2011-10-case","title":"iSeries 2011-10 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. \u003c\/p\u003e\n\u003cp\u003eStandard features include a molded-in hinge, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425109016875,"sku":"3i-2011-10BE","price":209.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Cubed Foam","offer_id":51425109049643,"sku":"3i-2011-10BC","price":279.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers","offer_id":51425109115179,"sku":"3i-2011-10DT","price":289.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers and Lid Organizer","offer_id":51425109082411,"sku":"3i-2011-10DL","price":344.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/edbf06b05c4582ac9856b3c2a69912ce6f128d7b-1200x611_cbf141cd-3c6c-461b-aaf6-34ad509b7247.png?v=1763038096"},{"product_id":"i-series-2918-10-case","title":"iSeries 2918-10 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. \u003c\/p\u003e\n\u003cp\u003eStandard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51342350844203,"sku":"3i-2918-10BE","price":284.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Cubed Foam","offer_id":51342350876971,"sku":"3i-2918-10BC","price":369.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Large Padded Dividers","offer_id":51342350909739,"sku":"3i-2918-10BD","price":233.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers","offer_id":51342350942507,"sku":"3i-2918-10DT","price":469.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/af285795b37b9e2ab97b6e7ff8a2e17bd1262d5d-1200x611_69b41c1d-c8ce-4600-b4b8-de6bf8c559c9.png?v=1759210339"},{"product_id":"i-series-2922-16-case","title":"iSeries 2922-16 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. \u003c\/p\u003e\n\u003cp\u003eStandard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425109311787,"sku":"3i-2922-16BE","price":369.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Cubed Foam","offer_id":51425109344555,"sku":"3i-2922-16BC","price":489.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Liner","offer_id":51425109377323,"sku":"3i-2922-16LT","price":489.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/c7c1fa874d4df8566db9b65c95f9c71b13085cc9-1200x611_31dbcad6-b565-4910-b980-283a68ce5364.png?v=1763038098"},{"product_id":"i-series-3016-10-case","title":"iSeries 3016-10 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. \u003c\/p\u003e\n\u003cp\u003eStandard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425109442859,"sku":"3i-3016-10BE","price":269.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Cubed Foam","offer_id":51425109475627,"sku":"3i-3016-10BC","price":364.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers","offer_id":51425109508395,"sku":"3i-3016-10DT","price":404.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/f21bbef8ba80bdb96f2bbf873727a614fd7e3fb8-1200x611_89859fdf-5e37-457b-8523-b66b908a118c.png?v=1763038098"},{"product_id":"i-series-3026-15-case","title":"iSeries 3026-15 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. \u003c\/p\u003e\n\u003cp\u003eStandard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425109705003,"sku":"3i-3026-15BE","price":429.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Cubed Foam","offer_id":51425109737771,"sku":"3i-3026-15BC","price":509.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Liner","offer_id":51425109770539,"sku":"3i-3026-15LT","price":534.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/dfe58847ea1fa3b693583f3670b5c1dc366a8c06-1200x611_70862ca2-3ef9-40e7-a69f-9eabe6f72db4.png?v=1763038077"},{"product_id":"i-series-4217-7-case","title":"iSeries 4217-7 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. \u003c\/p\u003e\n\u003cp\u003eStandard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425111310635,"sku":"3i-4217-7B-E","price":329.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Layered Foam","offer_id":51425111343403,"sku":"3i-4217-7B-L","price":404.99,"currency_code":"USD","in_stock":true},{"title":"OD Green \/ Layered Foam","offer_id":51425111376171,"sku":"3i-4217-7M-L","price":404.99,"currency_code":"USD","in_stock":true},{"title":"Desert Tan \/ Layered Foam","offer_id":51425111408939,"sku":"3i-4217-7T-L","price":404.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/5ae9949d6d2c7552f5cb4f25ff2800351239d170-1200x611_51ecdb18-c767-4f13-bdf5-2be93ad88203.png?v=1763038084"},{"product_id":"v-series-3611-case","title":"vSeries 3611 Case","description":"\u003cp\u003eOur vSeries cases are designed specifically for the secure transport of mic stands, drum hardware, and similar equipment that require a durable, practical, and appropriately sized transport system. \u003c\/p\u003e\n\u003cp\u003eSKB vSeries cases feature vacuum-formed Polyethylene hard-shell construction, sturdy built-in wheels, cushioned rubber over-molded injection molded handles, oversized protective bumpers, and TSA recognized and accepted locking latches.\u003c\/p\u003e\n\u003cp\u003eThis case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org.\u003c\/p\u003e\n\u003cp\u003eAll vSeries cases are certified ATA (Air Transport Association) rated Specification 300, Category 1, the highest standard for an airline transport container, assuring a minimum of 100 common carrier trips.\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425137131819,"sku":"1SKB-H3611","price":339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/4e6a0a2a9ec2b5be0a6d70e83e60fbe9bb5316d8-1200x611_f185517f-a7c8-4931-9f14-6dee6c529db8.png?v=1761559149"},{"product_id":"tl-series-2907-case","title":"TL Series 2907 Case","description":"\u003cp\u003eThe 1SKB-R2907 Roto-Molded 29\" Tripod Case provides ideal protection for transporting professional tripods and other hardware.\u003c\/p\u003e\n\u003cp\u003eRoto-molded of rugged Linear Low Density Polyethylene, this case is designed with internal foam in the base and lid to keep equipment secure and protected. The case has internal dimension of 29\" tall with a diameter of 7.5\", and features a sturdy, high-tension slide release buckle with heavy-duty web straps for easy closure, room on both sides to adhere shipping labels, and two molded-in ergonomic carrying handles. This case comes with SKB's Lifetime Warranty.\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425137885483,"sku":"1SKB-R2907","price":234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/448075f85d71afa3580498d9e22976ec97141009-1200x611_b5950e76-3107-40b7-8f4a-2a910aa8459a.png?v=1761559190"},{"product_id":"tl-series-4111-case","title":"TL Series 4111 Case","description":"\u003cp\u003eThe 1SKB-R4111W Roto-Molded 41\" Tripod Case provides ideal protection for transporting professional tripods, lighting stands, and other hardware.\u003c\/p\u003e\n\u003cp\u003eRoto-molded of rugged Linear Low Density Polyethylene, this case is designed with internal foam in the base and lid to keep equipment secure and protected. The case has internal dimension of 41\" tall with a diameter of 11\", and features a sturdy, high-tension slide release buckle with heavy-duty web straps for easy closure, room on both sides to adhere shipping labels, two molded-in ergonomic carrying handles, and in-line skate style wheels for easy transportation. This case comes with SKB's Lifetime Warranty.\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425137951019,"sku":"1SKB-R4111W","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/f47c37013b542498d7e3e0a9ee8ebc84ffd20fd9-1200x611_626abe5c-aae0-4562-adb9-7ba8813624da.png?v=1761559196"},{"product_id":"v-series-4816-case","title":"vSeries 4816 Case","description":"\u003cp\u003eOur vSeries cases are designed specifically for the secure transport of mic stands, drum hardware, and similar equipment that require a durable, practical, and appropriately sized transport system. \u003c\/p\u003e\n\u003cp\u003eSKB vSeries cases feature vacuum-formed Polyethylene hard-shell construction, sturdy built-in wheels, cushioned rubber over-molded injection molded handles, oversized protective bumpers, and TSA recognized and accepted locking latches.\u003c\/p\u003e\n\u003cp\u003eThis case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org.\u003c\/p\u003e\n\u003cp\u003eAll vSeries cases are certified ATA (Air Transport Association) rated Specification 300, Category 1, the highest standard for an airline transport container, assuring a minimum of 100 common carrier trips.\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425137557803,"sku":"1SKB-H4816W","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/e92a145961c970e4e678290d20985eb6f49b5dab-1200x611_5291707c-c98f-4f95-89bd-48dc05805a67.png?v=1761559160"},{"product_id":"tl-series-4611-case","title":"TL Series 4611 Case","description":"\u003cp\u003eThe 1SKB-R4611W Roto-Molded 46\" Tripod Case provides ideal protection for transporting professional tripods, lighting stands, and other hardware.\u003c\/p\u003e\n\u003cp\u003eRoto-molded of rugged Linear Low Density Polyethylene, this case is designed with internal foam in the base and lid to keep equipment secure and protected. The case has internal dimension of 46\" tall with a diameter of 11\", and features a sturdy, high-tension slide release buckle with heavy-duty web straps for easy closure, room on both sides to adhere shipping labels, two molded-in ergonomic carrying handles, and in-line skate style wheels for easy transportation. This case comes with SKB's Lifetime Warranty.\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425138180395,"sku":"1SKB-R4611W","price":344.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/7a4a22e402398f8b8fb9a4adb27dd07da373e860-1200x611_2ba94f43-d234-4c23-b980-5c4b22e4f8a9.png?v=1761559213"},{"product_id":"i-series-1006-3-blackmagic-design-atem-mini-case","title":"iSeries 1006-3 Blackmagic Design ATEM Mini Case","description":"\u003cp\u003eThe iSeries 3i-10063ATM was designed to fit the Blackmagic Design ATEM Mini, ATEM Mini Pro, ATEM Mini Pro ISO, ATEM SDI, or ATEM SDI Pro ISO. The case interior features high quality foam that has been form cut to fit the switcher with a large additional pocket (measuring 7.25\" x 4.125\" x 1.25\") below for the power supply and other accessories.\u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425138213163,"sku":"3i-10063ATM","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/d3524ff26b1a7d596fd99691f910218f1e3a6620-1200x611_b9af3b41-0ea3-42e6-8632-60e2bd52378b.png?v=1761559224"},{"product_id":"i-series-2015-7-case","title":"iSeries 2015-7 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425143062827,"sku":"3i-2015-7B-E","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Cubed Foam","offer_id":51425143095595,"sku":"3i-2015-7B-C","price":224.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers","offer_id":51425143161131,"sku":"3i-2015-7DT","price":249.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers and Lid Organizer","offer_id":51425143128363,"sku":"3i-2015-7DL","price":294.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/fc394bd01d5c6c1ffd825cd752bde1134a6c29db-1200x611_c1bee20f-55e0-4d58-ae8b-ea80901308e1.png?v=1763038083"},{"product_id":"i-series-2015-10-chauvet-freedom-par-case","title":"iSeries 2015-10 Chauvet Freedom Par Case","description":"\u003cp\u003eThe 3i-201510PAR Chauvet Freedom Par case will accommodate many models and is the perfect solution for a rental house, band or DJ that travels with up lighting. This case fits six Par lights. The interior of this case is designed with rigid dividers to keep the fixtures from rubbing against each other with high quality dense PE foam positioned at the bottom of the case to keep the Par lights at an easy reach height. There are (10) pockets positioned around the outside of the outside of the lights to store power cables and other accessories.\u003c\/p\u003e\n\u003cp\u003eThe 3i-201510PAR iSeries case is watertight, dust proof and lightweight and features a convenient push button pull handle and in-line wheels for easy transport with Trigger Latch® System that can be retrofitted with TSA Trigger Latch® System or locked with SKB's TSA Combination Padlock in the stainless steel locking loops.\u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425143849259,"sku":"3i-201510PAR","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/844b5b954427015702f2fe273b17af875e33444d-1200x611_b282af02-4cd1-4233-bdc9-794b49c711f4.png?v=1761559549"},{"product_id":"i-series-2213-12-case","title":"iSeries 2213-12 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425143914795,"sku":"3i-2213-12BE","price":249.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Cubed Foam","offer_id":51425143947563,"sku":"3i-2213-12BC","price":329.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Large Padded Dividers","offer_id":51425144013099,"sku":"3i-2213-12DT","price":404.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Large Padded Dividers and Lid Organizer","offer_id":51425143980331,"sku":"3i-2213-12DL","price":444.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/8aa9350b8b64bf972a4de2f3639dcb41757aa710-1200x611_4578941f-a75f-4638-a1d8-61570a016e19.png?v=1763038082"},{"product_id":"i-series-1610-10-case","title":"iSeries 1610-10 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425143652651,"sku":"3i-1610-10BE","price":149.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Cubed Foam","offer_id":51425143685419,"sku":"3i-1610-10BC","price":184.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers","offer_id":51425143718187,"sku":"3i-1610-10DT","price":204.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/6b5cc46a14815a238b19901f2c35429b1266306e-1200x611_40465f85-e43c-4af4-ab0f-ce0ed3048ab0.png?v=1763038079"},{"product_id":"i-series-1813-5-case","title":"iSeries 1813-5 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425144144171,"sku":"3i-1813-5B-E","price":134.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Cubed Foam","offer_id":51425144176939,"sku":"3i-1813-5B-C","price":194.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Layered Foam","offer_id":51425144209707,"sku":"3i-1813-5B-L","price":194.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers","offer_id":51425144275243,"sku":"3i-1813-5DT","price":204.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers and Lid Organizer","offer_id":51425144242475,"sku":"3i-1813-5DL","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/061a75fd924b5cbd045011fc9d9ce9af5a949f24-1200x611_de538ca7-401d-4c39-bd9c-2cf59167be47.png?v=1763038088"},{"product_id":"i-series-2217-10-blackmagic-design-atem-ccp-atem-1-m-e-adv-panel-or-da-vinci-mini-panel-case","title":"iSeries 2217-10 Blackmagic Design ATEM CCP, ATEM 1 M\/E Adv Panel or DaVinci Mini Panel Case","description":"\u003cp\u003eThe iSeries 3i-221710BM1 was designed to fit the Blackmagic Design ATEM Camera Control Panel, ATEM 1 M\/E Advanced Panel, or the DaVinci Resolve Mini Panel, and features a high quality PE foam interior that has been form cut for a custom fit.\u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425144701227,"sku":"3i-221710BM1","price":519.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/00bb95923ffc0339c6ccda678e0102560e930270-1200x611_c5c52f4e-a1d5-42fe-ba6a-a4d9920a49a4.png?v=1761559631"},{"product_id":"i-series-1914-8-case","title":"iSeries 1914-8 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425144799531,"sku":"3i-1914-8B-E","price":239.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Cubed Foam","offer_id":51425144832299,"sku":"3i-1914-8B-C","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Layered Foam","offer_id":51425144865067,"sku":"3i-1914-8B-L","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers","offer_id":51425144897835,"sku":"3i-1914-8DT","price":304.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/057af2ef02ffae3d2faa3fbfc91e96e0e43ad523-1200x611_463b179c-7af7-4ae5-98e9-bb49945168a0.png?v=1763038074"},{"product_id":"i-series-3021-18-case-w-think-tank-designed-liner","title":"iSeries 3021-18 Case w\/Think Tank Designed Liner","description":"\u003cp\u003eThe 3i-3021-18LT is watertight and dustproof, and features a deluxe Nylex-wrapped closed cell fitted foam liner and Velex-covered foam pads with heavy duty hook-and-loop tabs to create the perfect fit for all kinds of gear. Built-in wheels and a pull handle provide convenient transportability.\u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Padded Liner","offer_id":51425145782571,"sku":"3i-3021-18LT","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/7871ff55be93bc6036758ba659254b8054625cea-1200x611_444cf7aa-ffae-42c7-b152-40336e972716.png?v=1761559752"},{"product_id":"i-series-3019-12-case","title":"iSeries 3019-12 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. \u003c\/p\u003e\n\u003cp\u003eStandard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Cubed Foam","offer_id":51425145454891,"sku":"3i-3019-12BC","price":439.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Empty","offer_id":51425145422123,"sku":"3i-3019-12BE","price":324.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers","offer_id":51425145487659,"sku":"3i-3019-12DT","price":564.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/fad5b4a7ab019176512b7179ea92681384dbe967-1200x611.png?v=1759149592"},{"product_id":"i-series-3613-12-case","title":"iSeries 3613-12 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. \u003c\/p\u003e\n\u003cp\u003eStandard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425145815339,"sku":"3i-3613-12BE","price":354.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Layered Foam","offer_id":51425145848107,"sku":"3i-3613-12BL","price":429.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers","offer_id":51425145880875,"sku":"3i-3613-12DT","price":444.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/9cdd028f23db03eafea3f9b8ee2ec19963492909-1200x611_cb370cf5-4fbf-4504-917d-737db3b8438d.png?v=1763038074"},{"product_id":"i-series-2011-8-lens-case","title":"iSeries 2011-8 Lens Case","description":"\u003cp\u003eThe iSeries 20118LENS case is the perfect companion case for the professional photographer. This case will hold six lenses such as the Canon Cinema Prime Lenses or Schneider Kreunznach Xenon FF Prime Lenses. Each lens slot has a diameter of 125mm and the base depth of each lens slot is a total of 120mm. The useable lid depth is 35mm creating a maximum length of 155mm per lens. There are two removable foam discs provided to change the internal base lens height to 97mm instead of the 120mm when needed. This case is the maximum approved size for airline carry on travel. \u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425146994987,"sku":"3i-20118LENS","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/61ce38d762d0d4b0662376c7b1c8367d623c2416-1200x611_da1b70cd-0d77-49a4-9ad6-952eceadb587.png?v=1761559847"},{"product_id":"i-series-4414-10-case","title":"iSeries 4414-10 Case","description":"\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. \u003c\/p\u003e\n\u003cp\u003eStandard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425152893227,"sku":"3i-4414-10BE","price":334.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Layered Foam","offer_id":51425152925995,"sku":"3i-4414-10BL","price":404.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Padded Dividers","offer_id":51425152958763,"sku":"3i-4414-10DT","price":479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/6abcc2a0215c3f07f22185fea001acc4f0b5249c-1200x611_a8f2ef2f-4dbb-4f91-a129-02c6a939e4e9.png?v=1763038096"},{"product_id":"iseries-2617-12-atem-tv-studio-hd8-case","title":"iSeries 2617-12 Blackmagic Design ATEM TV Studio HD8\/4K8 Case","description":"\u003cp\u003eThe iSeries 3i-261712HD8 was designed to fit the Blackmagic Design ATEM Television Studio HD8, HD8 ISO, or 4K8. The case interior features high quality foam that has been form cut to fit the switcher with a large additional pocket (measuring 22\"x 8”x 4.875”) below for the power supply and other accessories.\u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425164656939,"sku":"3i-261712HD8","price":679.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/045c8263aecc884119b78a4c4d76039c08cda12c-1200x611_9ea81527-421a-489e-8b10-cb946becc548.png?v=1761560701"},{"product_id":"iseries-2421-7-custom-24-imac-case","title":"iSeries 2421-7 Custom 24” iMac Case","description":"\u003cp\u003eThe 3i-2421-IMAC accommodates 24\" iMacs with room for a keyboard, mouse, trackpad, and all necessary cables. This waterproof iSeries case features a virtually indestructible exterior and a high quality form-cut PE foam  interior that provides the perfect fit and maximum protection of a 24\" iMac and accessories in transport. The keyboard slot can fit both the standard compact keyboard as well as the larger keyboard with numeric pad by removing foam pieces from the slot. The accessory pocket near the front of the case measures 8” x 2.25” x 4.5” and the accessory pocket below the iMac measures 17.5” x 6.25” x 4”.  The 3i-2421-IMAC will fit M3 generation models as well as M4 generation.  \u003c\/p\u003e\n\u003cp\u003eThe case also comes standard with TSA-retrofittable Trigger Latch® System, built-in quiet-glide wheels, and an easy-to-operate one-button pull handle for optimal convenience and functionality.\u003c\/p\u003e\n\u003cp\u003eSKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425172848939,"sku":"3i-2421-IMAC","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/2a4d623e5c7388a1d1170a46fbddebacc20da11e-1200x611_4aa4886a-be62-4241-ac89-3e24b820ee29.png?v=1761560901"},{"product_id":"iseries-1510-9-canon-xa70-xa75-camcorder-case","title":"iSeries 1510-9 Canon XA70\/XA75 Camcorder Case","description":"\u003cp\u003eThe iSeries 3i-1510-9XA features a high quality foam interior that has been form cut to fit the Canon XA70 or XA75 camcorder, with additional pockets for two batteries (either BP-820 or BP-828), two memory cards, power supply, and other accessories. The accessory pocket in the back left corner measures 5.125” x 2.375” x 5.75”. The accessory pocket in the back right corner measures 4.375” x 2.75” x 5.75”.\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425173340459,"sku":"3i-1510-9XA","price":234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/a23cdd773af182fc68ce160dc4d7d9c3db5207a4-1200x611_f053b145-7384-433a-a262-488636b49beb.png?v=1761560992"},{"product_id":"v-series-4812-case","title":"vSeries 4812 Case","description":"\u003cp\u003eOur vSeries cases are designed specifically for the secure transport of mic stands, drum hardware, and similar equipment that require a durable, practical, and appropriately sized transport system. \u003c\/p\u003e\n\u003cp\u003eSKB vSeries cases feature vacuum-formed Polyethylene hard-shell construction, sturdy built-in wheels, cushioned rubber over-molded injection molded handles, oversized protective bumpers, and TSA recognized and accepted locking latches.\u003c\/p\u003e\n\u003cp\u003eThis case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org.\u003c\/p\u003e\n\u003cp\u003eAll vSeries cases are certified ATA (Air Transport Association) rated Specification 300, Category 1, the highest standard for an airline transport container, assuring a minimum of 100 common carrier trips.\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425178026283,"sku":"1SKB-H4812W","price":404.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/56cf192562bb69bfcc0b6f695ffc89e8c176d5d0-1200x611_8db00fc4-0138-47f5-a0a1-2a02962db65a.png?v=1761561243"},{"product_id":"tl-series-3709-case","title":"TL Series 3709 Case","description":"\u003cp\u003eThe 1SKB-R3709W provides ideal protection for transporting professional tripods, lighting stands, or other hardware. Roto-molded of rugged Linear Low Density Polyethylene, this case is designed with internal foam in the base and lid to keep the equipment protected. \u003c\/p\u003e\n\u003cp\u003eThe case has internal dimensions of 37\" tall with a diameter of 9\". It features a sturdy, high-tension slide release buckle with heavy-duty web straps for easy closure. This case has room on both sides to adhere shipping labels. The 1SKB-R3709W has two molded-in ergonomic carrying handles, and in-line skate style wheels for easy transportation. This case comes with a lifetime warranty.\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425178190123,"sku":"1SKB-R3709W","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/d2b7966191cd22d2749a7425c33cd2a25fc3651d-1200x611_6c3ad7aa-c85b-48ef-9ae0-ef66bbe4142a.png?v=1761561269"},{"product_id":"tl-series-4209-case","title":"TL Series 4209 Case","description":"\u003cp\u003eThe 1SKB-R4209W provides ideal protection for transporting professional tripods, lighting stands, or other hardware. Roto-molded of rugged Linear Low Density Polyethylene this case is designed with internal foam on the base and lid to keep the equipment protected. \u003c\/p\u003e\n\u003cp\u003eThe case has internal dimensions of 42\" tall with a diameter of 9\". It features a sturdy, high-tension slide release buckle with heavy-duty web straps for easy closure. This case has room on both sides to adhere shipping labels. The 1SKB-R4209W has two molded-in ergonomic carrying handles, and in-line skate style wheels for easy transportation. This case comes with a lifetime warranty.\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Empty","offer_id":51425178321195,"sku":"1SKB-R4209W","price":304.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/435868db5bda62ec45ca6cb8ea657b40b1a5aa2c-1200x611_45892199-777a-495e-b867-70751a871f07.png?v=1761561293"},{"product_id":"i-series-1309-6-blackmagic-design-pocket-cinema-camera-6-k-pro-case","title":"iSeries 1309-6 Blackmagic Design Pocket Cinema Camera 6K Pro Case","description":"\u003cp\u003eThe iSeries 3i-13096-6KP features a custom foam interior that's been form cut to accommodate the Blackmagic Design Pocket Cinema Camera 6K Pro or 6K G2 with lens attached, one additional lens slot, two battery pockets, two SDHC memory card slots, and a compartment for accessories. Lens attached to camera can be up to 7.25\" long with a diameter of 3.375\" when foam divider is removed. With the foam divider left in, lenses can be up to 5.25\" long with a diameter of 3.375\". The foam divider left in creates an additional accessory compartment that is 4.25\" x 2\" x 4.5\". The extra lens slot has a diameter of 3.5\" and a max depth of 4.75\". The extra lens slot comes with two .5\" thick ring pads to accommodate shorter lenses. With both ring pads installed the depth changes from 4.75\" to 3.75\". The main accessory pocket measures 4\" x 2.375\" x 4.5\".\u003c\/p\u003e\n\u003cp\u003eAll SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).\u003c\/p\u003e","brand":"SKB Cases","offers":[{"title":"Black \/ Pre-Cut","offer_id":51425178976555,"sku":"3i-13096-6KP","price":184.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/files\/a09c279a7b6f938b03bda647ab99f85864a94c08-1200x611_c187d524-48ab-4063-96cd-047118df33e9.png?v=1766985415"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/9294\/8779\/collections\/Travel_easy_with_the_best_camera_gear.jpg?v=1762770244","url":"https:\/\/www.skbcases.com\/collections\/photo-and-video.oembed?page=5","provider":"SKB Cases","version":"1.0","type":"link"}