Pro Audio Config

Pro Audio Cases -> Subcategories

Rack Cases -> Subcategories

Soft Racks

Roto Racks

Fly Racks

Shock Racks

MIL-STD Shock Racks

Specialty Racks

Accessories (for Rack Cases)

The 3i-2421-IMAC accommodates 24" iMacs with room for a keyboard, mouse, trackpad, and all necessary cables. This waterproof iSeries case features a virtually indestructible exterior and a high quality form-cut PE foam  interior that provides the perfect fit and maximum protection of a 24" iMac and accessories in transport. The keyboard slot can fit both the standard compact keyboard as well as the larger keyboard with numeric pad by removing foam pieces from the slot. The accessory pocket near the front of the case measures 8” x 2.25” x 4.5” and the accessory pocket below the iMac measures 17.5” x 6.25” x 4”.

The case also comes standard with TSA-retrofittable trigger latches, built-in quiet-glide wheels, and an easy-to-operate one-button pull handle for optimal convenience and functionality.

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810G), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).

Accommodates one 24" iMac with room for keyboard, trackpad, mouse, and all necessary cables

Waterproof and dust tight design (MIL-STD 810G)

Snap-down rubber over-molded cushion grip handle

Ambient pressure equalization valve (MIL-STD 810G)

Resistant to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G)

Made In USA

The 3i-2424-MACP has been designed especially to accommodate a Mac Pro Tower (2019 or later models), with room for a keyboard with numeric keypad, track pad 2, mouse, and all necessary cables. 

This waterproof iSeries case features a virtually indestructible exterior and a custom precut, high quality XPE foam interior that provides the perfect fit and maximum protection for a Mac Pro Tower and accessories in transport. The case also comes standard with TSA-retrofittable trigger latches, built-in quiet-glide wheels, and an easy-to-operate one-button pull handle for optimal convenience and functionality.

All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve, and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).

Keyboard pocket dims are 16.5" x 0.625" x 4.5"

Mouse pocket dims are 2.5" x 0.875" x 4.5"

Track Pad 2 pocket dims are 6.25" x 0.375" x 4.5"

Custom cut foam interior to fit one Mac Pro Tower (2019 or later models) with room for keyboard, track pad 2, mouse, and all necessary cables

Waterproof, impact-resistant construction

The 3i-1813-5NT features a custom padded Think Tank-designed interior with a rigid removable flap that protects your laptop during transit and provides a sturdy work surface when in use. A heavy-duty hook-and-loop strap secures the laptop in place along with positionable foam blocks that help provide a custom fit for all laptops up to 16". Underneath the laptop are two removable clear accessory pouches that accommodate power supplies, cables, and other items. There is also a handy lid organizer for storage of other small accessories.

This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit 

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810G), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).

Inside laptop dimensions are up to 15.125"x9.7"x1.25".  Lid organizer dimensions are 15"x10"x1.25".  Pouch dimensions are 7.5"x5"x1.5".

Includes positionable foam blocks for a custom fit

Sturdy hook-and-loop secures the laptop in place

Room for accessories in lid organizer and accessory pouches

This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org.

The 3i-18135SNSC laptop case includes a sun screen that stores in the lid and up to a 17" laptop in the base. An accessory compartment is located under the laptop which is ideal for a power supply or an external hard drive. 

The sunscreen includes a collapsible frame for secure storage. The bottom of the case features a built in 3/8" female thread which is reinforced by a heavy duty metal plate. Any light stand, tripod, or mic stand will work to support the case as long as it has or is adapted to a 3/8" male mount and can handle the weight of the laptop, case, and other accessories.

Ultra high-strength polypropylene copolymer resin

UV, solvent, corrosion and fungus resistant (MIL-STD 810G)

Complete gasket seal makes these cases absolutely watertight (MIL-STD 810G)

Automatic ambient pressure equalization value (MIL-STD 810G)

Custom cut for 17" laptop with sunscreen.