Pro Audio Config

Pro Audio Cases -> Subcategories

Rack Cases -> Subcategories

Soft Racks

Roto Racks

Fly Racks

Shock Racks

MIL-STD Shock Racks

Specialty Racks

Accessories (for Rack Cases)

The 3i1510-6-RD features a high quality foam interior that has been form cut to fit the RODECaster Duo. There is a large accessory pocket below the mixer that measures 12” long by 4.5” wide and is perfect for storing the power supply, cables, and other accessories. The accessory compartment is 1.63” deep near the back of the case and 3” deep in the front of the case.

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810G), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).

Accessory pocket below mixer measuring 12" long x 4.5" wide (1.63" deep at the back of case, 3" deep at the front)

Waterproof dust-tight design (MIL-STD 810G)

Snap-down rubber over-molded cushion grip handle

Ambient pressure equalization valve(MIL-STD 810G)

Resistant to UV, solvents, corrosion, fungus, and impact damage (MIL-STD 810G)

Made In USA

The 3i1813-7MPC2 features high quality form-cut PE foam designed specifically to house the AKAI MPC Live II Sampler/Sequencer, with a large (13" x 6.63" x 3.25") accessory pocket below for the power supply, headphones, audio cables, or other accessories.

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810G), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).

Custom cut foam interior for AKAI MPC Live II

Open compartment for headphones, cables, and other accessories

Ultra high-strength polypropylene copolymer resin shell

Complete gasket seal makes the case watertight

Automatic ambient pressure equalization valve (MIL-STD 810G)

The 3i1813-5MPC1 features high quality form-cut PE foam designed specifically to house the AKAI MPC One + Sampler/Sequencer, with side pockets for the power supply, audio cables, or other accessories.

Custom cut foam interior for AKAI MPC One +

Side compartments for power supply, cables, and other accessories

Our all-new 1SKB-R106W Rolling Compact Rig features a standard 10U top and 6U front and rear rack rails. 

It also includes a new one-touch pull handle and back lid mounted wheels for easy transport, as well as a redesigned exterior that allows this new Rig to easily stack with existing standard Roto-Racks and the recently updated Roto Rolling Racks. Featuring an injection-molded top, the new Rolling Compact Rig also comes standard with TSA-accessible locking latches that secure the lid to the top of the rig.

This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit 

Fits the Allen & Heath SQ5 only with the 1SKB-RE-SQ5 rack ears.

Rotationally molded of Linear Medium Density Polyethylene (LMDPE) for maximum impact resistance

10U, 7-degree angled top threaded steel rails for secure mounting of popular mixers/DJ controllers

6U threaded vertical steel rails on front

This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org.

Our all-new 1SKB-R104W Rolling Compact Rig features a standard 10U top and 4U front and rear rack rails. 

4U threaded vertical steel rails on front

Our all-new 1SKB-R102W Rolling Compact Rig features a standard 10U top and 2U front and rear rack rails. 

2U threaded vertical steel rails on front

Featuring high quality form-cut PE foam designed specifically to house the Akai MPC X or MPC X Special Edition Sampler/Sequencer, the 3i2421-7MPCX iSeries Case provides the maximum protection in transporting the stand alone sampler/sequencer. 

Included is a recessed compartment below the mixer for cables and other accessories. An oversized carry handle, user-friendly one-finger push button release tow handle, and convenient in-line wheels all help to ensure that transporting your gear is as easy and secure as possible.

Compartment (under MPC X) for cables and accessories

UV, solvent, corrosion and fungus resistant (MIL-STD 810G)

Complete gasket seal makes these cases absolutely watertight (MIL-STD 810G)

Automatic ambient pressure equalization value (MIL-STD 810G)

Convenient in-line skate style wheels with pull handle

The 3i-201510PAR Chauvet Freedom Par case will accommodate many models and is the perfect solution for a rental house, band or DJ that travels with up lighting. This case fits six Par lights. The interior of this case is designed with rigid dividers to keep the fixtures from rubbing against each other with high quality dense PE foam positioned at the bottom of the case to keep the Par lights at an easy reach height. There are (10) pockets positioned around the outside of the outside of the lights to store power cables and other accessories.

The 3i-201510PAR iSeries case is watertight, dust proof and lightweight and features a convenient push button pull handle and in-line wheels for easy transport with trigger release latches that can be retrofitted with TSA trigger latches or locked with SKB's TSA Combination Padlock in the stainless steel locking loops.

The six main compartments measure 5.5"L x 6"W x 7.5"H.  Four of side compartments measure 1"L x 5.5"W x 7.5"H.  Six of the side compartments measure 1"L x 6"W x 7.5"H.

Ultra high-strength polypropylene copolymer resin

Convenient push button release pull handle

The 1SKB-SC2714 combines the protective qualities of rigid foam with the style and portability of a canvas bag to accommodate popular DJ performance controllers or small MIDI controller keyboards. 

A padded carrying handle and shoulder strap provide lightweight portability. The 1SKB-SC2714 Controller Soft Case will accommodate products such as the Pioneer DDJ-SX3 and the DDJ-FLX6. It also fits popular guitar pedal products like the Headrush Prime.  Backed by SKB's one year Soft Product Warranty.

Durable 600 Denier exterior layered with rigid foam

Carrying handle and convenient shoulder strap

Backed by SKB's one year Soft Product Warranty

The 1SKB-SC2414 combines the protective qualities of rigid foam with the style and portability of a canvas bag to accommodate popular DJ performance controllers or small MIDI controller keyboards.

A padded carrying handle and shoulder strap provide lightweight portability. The 1SKB-SC2414 Controller Soft Case will accommodate products such as the Numark NS6 and more. Backed by SKB's one year Soft Product Warranty.

The 1SKB-R102 is a 10U slanted top and 2U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! 

The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front and rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two TSA locking SKB patented trigger latches secure the lid while the flat hard top allows for stacking in transport and storage.

Note: Item may be pictured with the 1SKB-AV8 Retractable Shelf but is not included with this item.

The top rack has 17.5" rackable depth plus 2.25" in back for cables for a total of 19.75" on the top.

The lower 2U Rack is 3.5" high in front and 5.75" high in the rear with a 19.5" of useable depth.

Injection molded front and rear doors and lid

The 1SKB-SC1913 combines the protective qualities of rigid foam with the style and portability of a canvas bag to accommodate popular DJ performance controllers or small MIDI controller keyboards.

A padded interior, padded carrying handle, and shoulder strap provide lightweight portability. The 1SKB-SC1913 Controller Soft Case will accommodate products such as the American Audio VMS4 MIDI Station controller, Axiom 25 Midi Keyboard and more.  Backed by SKB's 1 year Soft Product Warranty.

Exterior pocket dimensions are 15" x 11" x 1.5"

Backed by SKB's 1 year Soft Product Warranty

The 1SKB-R106 is a 10U slanted top and 6U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! 

The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front, rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two TSA locking SKB patented trigger latches secure the lid while the flat hard top allows for stacking in transport and storage.

Note: Item is pictured with the 1SKB-AV8 Retractable Shelf and the 1SKB-DRW4 4 space drawer which are not included with this item.

Rack depth is listed at 6" and that is referencing the top of the rail on the slant portion of the case. At the bottom of the rail, the depth is 3.75". If nothing is mounted in the 4 spaces on the front, then the actual depth at top of the slant rail would actually be 17.125". After the first 3" from the bottom of the slant rail (and with nothing mounted in the 4 spaces on the front), the depth is 15.375". Product weight is without the optional 1SKB-AV8. The 1SKB-AV8 weighs 6 pounds.

Pictured retractable shelf is NOT included

The 1SKB-R104 is a 10U slanted top and 4U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! 

Rack depth is listed at 6" and that is referencing the top of the rail on the slant portion of the case. At the bottom of the rail, the depth is 3.75". If nothing is mounted in the 4 spaces on the front, then the actual depth at top of the slant rail would actually be 13.5". After the first 3" from the bottom of the slant rail (and with nothing mounted in the 4 spaces on the front), the depth is 11.75". Space between the top of the slant rails and the cover is ~3.5" (to allow XLR/cable connections on mixer with top mounted mic pres). Product weight is without the optional 1SKB-AV8. The 1SKB-AV8 weighs 6 pounds.