Sports Config

Bow Cases -> Subcategories

Gun Cases -> Subcategories

Fishing Cases -> Subcategories

Golf Cases -> Subcategories

Specialty Cases -> Subcategories

Features custom foam that fits the Ravin R500 Sniper or R500E with accessories.

Adjustable high density closed cell custom cut foam

Lid storage cavity for quiver to accommodates longer bolts

Additional bolt storage in the lid to accommodate up to nine bolts

Storage cavity for broadhead case (Sold Separately)

Large storage cavity for binoculars, range finder, tools etc.

In-line skate style wheels for easy transport.

Trigger release latches can be retrofitted with TSA accepted key locking latches.

Padlock holes include stainless steel padlock protector clips.

Cushion grip handles on three sides for comfortable lifting and carrying.

Waterproof and dust tight design (MIL-STD 810G).

Snap-down rubber over-molded cushion grip handle.

Ambient pressure equalization valve (MIL-STD 810G).

Resistant to UV, solvents, corrosion, fungus (MIL-STD 810G).

Resistant to impact damage (MIL-STD 810G).

Official Sponsor

The 3i-3019-HAV TenPoint Havoc RS440 / Siege RS410 Crossbow CaseCrossbow Case has a precision cut foam interior that offers optimal protection for one crossbow body with attached sight, with room for the extended buttstock. 

There is a dedicated cavity to accommodate a quiver with arrows (with room for longer bolts), crank, broadhead case (sold separately), additional arrows, and other accessories. Four trigger latches with four reinforced padlock locations (for customer supplied locks), cushioned snap-down handles on three sides, and recessed, in-line skate-style wheels all allow for maximum convenience and ease of transportation.

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810G), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).

Aadjustable high density closed cell custom cut foam

Long storage cavity for quiver to accommodates longer bolts

Waterproof and dust tight design (MIL-C-4150J).

3019-12 TenPoint Havoc Case

The iSeries 3913-12 TenPoint Vapor RS470 / Nitro 505 Crossbow Case features custom foam that fits the TenPoint Vapor RS470 or Nitro 505 crossbow, with room for a quiver, extra bolts, crank, and other accessories.

In-line skate style wheels for easy transport

TSA accepted key locking latches are available

Padlock holes include stainless steel padlock protector clips

Waterproof and dust tight design (MIL-STD 810G)

Snap-down rubber over-molded cushion grip handles for comfortable lifting and carrying

Ambient pressure equalization valve (MIL-STD 810G)

Resistant to UV, solvents, corrosion, fungus (MIL-STD 810G)

Resistant to impact damage (MIL-STD 810G)

The iSeries 3i-3913-VEN Crossbow Case features custom cut foam that is compatible with the TenPoint Stealth 450, Vengent S440, Viper S400, and TenPoint Turbo S1 Crossbow with room for a quiver, extra bolts, and crank or other accessories.

The iSeries Excalibur Breakdown Crossbow case is the prime choice for compact transport of Assassin, Axe, and Micro variants, with storage for stock, limbs, quiver, and other accessories.

Limb storage in the lid also offers room for a loaded quiver

Trigger release latches can be retrofitted with TSA accepted key locking latches

Cushion grip handles on three sides for comfortable lifting and carrying

Snap-down rubber over-molded cushion grip handle

The 3i-301912B-R2 has been designed specifically to fit the Ravin R26, R26X, R29, R29X, and R29X Sniper Package, with custom foam cutouts for a quiver, extra bolts, and other accessories.

Made In USA

The 3i-3613-BXB has been designed specifically to fit the Ravin RX5, R9, R10, R15, R20, and R20 Sniper Edition crossbows, as well as the TenPoint Shadow NXT and Stealth NXT (without Stealth foot stirrup). It features custom foam cutouts for the crossbow, crank, a dozen arrows, a quiver, and other accessories.

In-line skate style wheels and pull-out handle for easy transport

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. 

Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810G), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).

Downloads

Oversized heavy-duty handles and wide-set double wheels

Ultra high-strength polypropylene copolymer resin

UV, solvent, corrosion and fungus resistant (MIL-STD 810G)

Complete gasket seal makes these cases absolutely watertight (MIL-STD 810G)

Automatic ambient pressure equalization value (MIL-STD 810G)

Patented "trigger release" TSA Locking Latch system

TSA recognized and accepted locks can be retrofitted

Stainless steel locking loops for customer supplied lock

The SKB ATA Crossbow Case 8010 accommodates most of the crossbows produced by Horton, Barnett, Darton, Parker, Diamond Stryker, Ten Point and others.

This crossbow case features a hard exterior with rigid molded custom foam inserts, stylish embossing that adds structural support to lid, molded-in bumpers to protect hardware from impact, lockable draw-bolt metal latches, convenient wheels, molded-in pull-handle, and a comfortable carrying handle. 

SKB's "Perfect Match" valance bending system provides a tight and secure fit to prevent dirt

accommodates most of the crossbows produced by Horton, Barnett, Darton, Parker, Diamond Stryker, Ten Point and others

Large molded-in bumpers to protect hardware from impact

heavy-duty hinges and metal twist latches

locking hasps for customer supplied locks

waterjet bolt holders for up to a dozen bolts

The iSeries 3019-12 Mission Sub-1 Crossbow Case is an injection molded, watertight case featuring a custom cut high density foam to fit a Sub-1 Crossbow, quiver, and accessories ( 3 cavities), along with wheels and a tow handle for easy transport. Also compatible with Mission Sub-1 XR and Sub-1 Lite.

Accommodates a sub-1 crossbow, quiver, and accessories

The 3i-3613-BTN has been designed specifically to fit the Tenpoint Nitro XRT and Nitro X. Featuring watertight, dustproof, military-grade construction, this iSeries case was built to meet all the demands and specifications of the US Military and is the perfect solution to protect your valuable crossbow investment. 

Indeed, SKB Cases was recently named as the official case and gun protector of the US Olympic Shooting Team in recognition of SKB's superior quality, craftsmanship, and gear protection.