Added To Cart
Model: 3i-231714WMC
The 3i-231714WMC 4U Wireless Mic Fly Rack allows for transport of both rack equipment and wireless transmitters all in the same case. This case features a 4U injection molded rack frame with space below for four wireless handheld transmitters and four body pack transmitters, with additional space for smaller accessories.
Read More
The 3i-231714WMC 4U Wireless Mic Fly Rack allows for transport of both rack equipment and wireless transmitters all in the same case. This case features a 4U injection molded rack frame with space below for four wireless handheld transmitters and four body pack transmitters, with additional space for smaller accessories.
All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, and feature a gasket-sealed, water and dust tight, submersible design (MIL-C-4150J / IP67). Other standard features include a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810G).
Prop65 Information
This product can expose you to chemicals including chloroprene, which is known to the State of California to cause cancer. For more information go to p65warnings.ca.gov
- 4U removable injection molded shock rack cage
- Custom-cut foam to accommodate four wireless hand held transmitters and four body pack transmitters
- Under 62 linear inches (non-oversized luggage)
- Built-in wheels and pull handle
- Interior foam protection
- Ultra high-strength polypropylene copolymer resin case construction
- UV, solvent, corrosion and fungus resistant (MIL-STD-810G)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
- Automatic ambient pressure equalization value (MIL-STD-648C & IP67
- Molded-in hinges
- TSA Acceptable trigger release latch system
- Rubber over-molded cushion grip handles
- Locking loops to accommodate a customer supplied lock
Exterior
Hard
Built In Wheels or Casters
Yes
Rack Units
4
Rail To Rail
13 in
33.02 cm
Product Weight
30.46 lb
13.81 kg
Carton Length
26.5 in
67.31 cm
Carton Width
20 in
50.80 cm
Carton Height
16.5 in
41.91 cm
Shipping Weight
33.26 lb
15.08 kg
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases that have been modified, previously owned, or used for rental purposes by institutions or schools are not covered by this warranty.
No downloads available for this product
Yes. Minimum quantities are required. Submit a quote request here.
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. To register your case, fill out the form here.
Most latches, handles, and wheels are considered field replaceable, and can be provided at no charge to the original owner. If you need parts, contact our customer service department:
By phone: (714) 685-5207
By email: customerservice@skbcases.com
Online: Support Request form
Most repairs can be completed within two weeks of receiving your case.
Some cases can be retrofitted with TSA latches. Please contact our customer service department at (714) 685-5207 or customerservice@skbcases.com for more information.
Model: 3i-231714WMC
The 3i-231714WMC 4U Wireless Mic Fly Rack allows for transport of both rack equipment and wireless transmitters all in the same case. This case features a 4U injection molded rack frame with space below for four wireless handheld transmitters and four body pack transmitters, with additional space for smaller accessories.
Read More
The 3i-231714WMC 4U Wireless Mic Fly Rack allows for transport of both rack equipment and wireless transmitters all in the same case. This case features a 4U injection molded rack frame with space below for four wireless handheld transmitters and four body pack transmitters, with additional space for smaller accessories.
All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, and feature a gasket-sealed, water and dust tight, submersible design (MIL-C-4150J / IP67). Other standard features include a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810G).
Prop65 Information
This product can expose you to chemicals including chloroprene, which is known to the State of California to cause cancer. For more information go to p65warnings.ca.gov
- 4U removable injection molded shock rack cage
- Custom-cut foam to accommodate four wireless hand held transmitters and four body pack transmitters
- Under 62 linear inches (non-oversized luggage)
- Built-in wheels and pull handle
- Interior foam protection
- Ultra high-strength polypropylene copolymer resin case construction
- UV, solvent, corrosion and fungus resistant (MIL-STD-810G)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
- Automatic ambient pressure equalization value (MIL-STD-648C & IP67
- Molded-in hinges
- TSA Acceptable trigger release latch system
- Rubber over-molded cushion grip handles
- Locking loops to accommodate a customer supplied lock
Exterior
Hard
Built In Wheels or Casters
Yes
Rack Units
4
Rail To Rail
13 in
33.02 cm
Product Weight
30.46 lb
13.81 kg
Carton Length
26.5 in
67.31 cm
Carton Width
20 in
50.80 cm
Carton Height
16.5 in
41.91 cm
Shipping Weight
33.26 lb
15.08 kg
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases that have been modified, previously owned, or used for rental purposes by institutions or schools are not covered by this warranty.
No downloads available for this product
Yes. Minimum quantities are required. Submit a quote request here.
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. To register your case, fill out the form here.
Most latches, handles, and wheels are considered field replaceable, and can be provided at no charge to the original owner. If you need parts, contact our customer service department:
By phone: (714) 685-5207
By email: customerservice@skbcases.com
Online: Support Request form
Most repairs can be completed within two weeks of receiving your case.
Some cases can be retrofitted with TSA latches. Please contact our customer service department at (714) 685-5207 or customerservice@skbcases.com for more information.