Added To Cart
Model: 1SKB19-R1208
The SKB Gig Rig series has set the standard for mixer/rack cases for more than 15 years. The 4th Generation Gig Rig raises the bar yet again. Based on the 1SKB19-R1406 Mighty Gig Rig design, the 1SKB19-R1208 Gig Rig provides more versatility than previous generation Gig Rigs.
Read More
The SKB Gig Rig series has set the standard for mixer/rack cases for more than 15 years. The 4th Generation Gig Rig raises the bar yet again. Based on the 1SKB19-R1406 Mighty Gig Rig design, the 1SKB19-R1208 Gig Rig provides more versatility than previous generation Gig Rigs.
Roto-molded of Linear Low Density Polyethylene (LLDPE), the 1SKB19-R1208 Gig Rig has a uni-body construction that is extremely durable. The 7° angled top steel rails are 12U rack spaces with extra room in the back for cable connections. The lid provides enough space for cables to stay connected as well as, space for the optional 1SKB-AV8 retractable shelf. The front facing 8U steel rails provide enough space for amps or outboard gear. 8U Rear rack rails are included for additional mounting, storage and support.
In the same fashion as the Mighty Gig Rig, the lid can also be used as a pedestal for the 1SKB19-R1208 Gig Rig. By placing the lid on the bottom wheeled skid and locking down the Gig Rig on top, the mixer height has perfect performance position. The 1SKB-R1208 Gig Rig includes two injection molded extra-long handles, (one per side) for easy lifting in transport. Four heavy-duty locking castors complete the Gig Rig.
Prop65 Information
This product can expose you to chemicals including chloroprene, which is known to the State of California to cause cancer. For more information go to p65warnings.ca.gov
- Accommodates deep mixers
- Greater Vertical mixer depth
- Accommodates the AV-8 retractable shelf
- Indestructible injection molded side handles
- Locking twist latches
- Includes wheel set with locking casters
Exterior
Hard
Built In Wheels or Casters
Yes
Rack Units
20
Top Space Units
12
Bottom Space Units
8
Front Rail To Back Lid
22 in
55.88 cm
Rail To Rail
18.675 in
47.43 cm
Rear Rail to Front Lid
22 in
55.88 cm
Product Weight
70.43 lb
31.94 kg
Exterior Length
28.75 in
73.03 cm
Exterior Width
27.75 in
70.48 cm
Exterior Height
23.75 in
60.33 cm
Carton Length
30 in
76.20 cm
Carton Width
28 in
71.12 cm
Carton Height
24.5 in
62.23 cm
Shipping Weight
75.76 lb
34.36 kg
Exterior height is without wheels installed and case closed.
Exterior height in use with lid as a pedestal and wheels installed is 40.75"(front of slanted rack) to 43.5" (rear slanted rack).
16 "Rack Space Units Bottom" represents 8U front and 8U rear spaces.
Rail to Lid Depth= 3.25" (same in front and back)
12U Rack Depth= 4.5" in front and 6.75" in back.
The slanted top 12U Rack has 3.5" in the rear for cable clearance.
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases that have been modified, previously owned, or used for rental purposes by institutions or schools are not covered by this warranty.
No downloads available for this product
Yes. Minimum quantities are required. Submit a quote request here.
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. To register your case, fill out the form here.
Most latches, handles, and wheels are considered field replaceable, and can be provided at no charge to the original owner. If you need parts, contact our customer service department:
By phone: (714) 685-5207
By email: customerservice@skbcases.com
Online: Support Request form
Most repairs can be completed within two weeks of receiving your case.
Some cases can be retrofitted with TSA latches. Please contact our customer service department at (714) 685-5207 or customerservice@skbcases.com for more information.
Model: 1SKB19-R1208
The SKB Gig Rig series has set the standard for mixer/rack cases for more than 15 years. The 4th Generation Gig Rig raises the bar yet again. Based on the 1SKB19-R1406 Mighty Gig Rig design, the 1SKB19-R1208 Gig Rig provides more versatility than previous generation Gig Rigs.
Read More
The SKB Gig Rig series has set the standard for mixer/rack cases for more than 15 years. The 4th Generation Gig Rig raises the bar yet again. Based on the 1SKB19-R1406 Mighty Gig Rig design, the 1SKB19-R1208 Gig Rig provides more versatility than previous generation Gig Rigs.
Roto-molded of Linear Low Density Polyethylene (LLDPE), the 1SKB19-R1208 Gig Rig has a uni-body construction that is extremely durable. The 7° angled top steel rails are 12U rack spaces with extra room in the back for cable connections. The lid provides enough space for cables to stay connected as well as, space for the optional 1SKB-AV8 retractable shelf. The front facing 8U steel rails provide enough space for amps or outboard gear. 8U Rear rack rails are included for additional mounting, storage and support.
In the same fashion as the Mighty Gig Rig, the lid can also be used as a pedestal for the 1SKB19-R1208 Gig Rig. By placing the lid on the bottom wheeled skid and locking down the Gig Rig on top, the mixer height has perfect performance position. The 1SKB-R1208 Gig Rig includes two injection molded extra-long handles, (one per side) for easy lifting in transport. Four heavy-duty locking castors complete the Gig Rig.
Prop65 Information
This product can expose you to chemicals including chloroprene, which is known to the State of California to cause cancer. For more information go to p65warnings.ca.gov
- Accommodates deep mixers
- Greater Vertical mixer depth
- Accommodates the AV-8 retractable shelf
- Indestructible injection molded side handles
- Locking twist latches
- Includes wheel set with locking casters
Exterior
Hard
Built In Wheels or Casters
Yes
Rack Units
20
Top Space Units
12
Bottom Space Units
8
Front Rail To Back Lid
22 in
55.88 cm
Rail To Rail
18.675 in
47.43 cm
Rear Rail to Front Lid
22 in
55.88 cm
Product Weight
70.43 lb
31.94 kg
Exterior Length
28.75 in
73.03 cm
Exterior Width
27.75 in
70.48 cm
Exterior Height
23.75 in
60.33 cm
Carton Length
30 in
76.20 cm
Carton Width
28 in
71.12 cm
Carton Height
24.5 in
62.23 cm
Shipping Weight
75.76 lb
34.36 kg
Exterior height is without wheels installed and case closed.
Exterior height in use with lid as a pedestal and wheels installed is 40.75"(front of slanted rack) to 43.5" (rear slanted rack).
16 "Rack Space Units Bottom" represents 8U front and 8U rear spaces.
Rail to Lid Depth= 3.25" (same in front and back)
12U Rack Depth= 4.5" in front and 6.75" in back.
The slanted top 12U Rack has 3.5" in the rear for cable clearance.
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases that have been modified, previously owned, or used for rental purposes by institutions or schools are not covered by this warranty.
No downloads available for this product
Yes. Minimum quantities are required. Submit a quote request here.
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. To register your case, fill out the form here.
Most latches, handles, and wheels are considered field replaceable, and can be provided at no charge to the original owner. If you need parts, contact our customer service department:
By phone: (714) 685-5207
By email: customerservice@skbcases.com
Online: Support Request form
Most repairs can be completed within two weeks of receiving your case.
Some cases can be retrofitted with TSA latches. Please contact our customer service department at (714) 685-5207 or customerservice@skbcases.com for more information.