Added To Cart
Model: 3i-20118LENS
The iSeries 20118LENS case is the perfect companion case for the professional photographer. This case will hold six lenses such as the Canon Cinema Prime Lenses or Schneider Kreunznach Xenon FF Prime Lenses. Each lens slot has a diameter of 125mm and the base depth of each lens slot is a total of 120mm. The useable lid depth is 35mm creating a maximum length of 155mm per lens. There are two removable foam discs provided to change the internal base lens height to 97mm instead of the 120mm when needed. This case is the maximum approved size for airline carry on travel.
Read More
The iSeries 20118LENS case is the perfect companion case for the professional photographer. This case will hold six lenses such as the Canon Cinema Prime Lenses or Schneider Kreunznach Xenon FF Prime Lenses. Each lens slot has a diameter of 125mm and the base depth of each lens slot is a total of 120mm. The useable lid depth is 35mm creating a maximum length of 155mm per lens. There are two removable foam discs provided to change the internal base lens height to 97mm instead of the 120mm when needed. This case is the maximum approved size for airline carry on travel.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810G), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).
Prop65 Information
This product can expose you to chemicals including chloroprene, which is known to the State of California to cause cancer. For more information go to p65warnings.ca.gov
- Custom cut PE foam to fit six lenses 125mm in diameter
- Removable foam discs for longer lenses
- Unconditional Lifetime Warranty
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD 810G)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD 810G)
- Automatic ambient pressure equalization valve (MIL-STD 810G)
- Resistant to corrosion and impact damage
- Molded-in hinges
- Rubber over-molded cushion grip handle
- Locking loops for a customer supplied lock
- Patented "trigger release" latch system
Exterior
Hard
Product Weight
9.57 lb
4.34 kg
Exterior Length
22 in
55.88 cm
Exterior Width
14 in
35.56 cm
Exterior Height
9 in
22.86 cm
Carton Length
22.5 in
57.15 cm
Carton Width
14.5 in
36.83 cm
Carton Height
9.5 in
24.13 cm
Shipping Weight
10.84 lb
4.92 kg
Cases with our Five Year Warranty are warranted for five (5) years to the original owner against defects in materials and craftsmanship. Any defects in workmanship will be covered by SKB. Damages due to accident, improper care, negligence or normal wear, where SKB is not at fault, are not covered. Freight cost to SKB Corporation is the responsibility of the customer. SKB will pay the return freight for warranty product shipped back to the customer.
Chart of all SKB iSeries products and its dimensions.
Yes. Minimum quantities are required. Submit a quote request here.
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. To register your case, fill out the form here.
Most latches, handles, and wheels are considered field replaceable, and can be provided at no charge to the original owner. If you need parts, contact our customer service department:
By phone: (714) 685-5207
By email: customerservice@skbcases.com
Online: Support Request form
Most repairs can be completed within two weeks of receiving your case.
Some cases can be retrofitted with TSA latches. Please contact our customer service department at (714) 685-5207 or customerservice@skbcases.com for more information.
Model: 3i-20118LENS
The iSeries 20118LENS case is the perfect companion case for the professional photographer. This case will hold six lenses such as the Canon Cinema Prime Lenses or Schneider Kreunznach Xenon FF Prime Lenses. Each lens slot has a diameter of 125mm and the base depth of each lens slot is a total of 120mm. The useable lid depth is 35mm creating a maximum length of 155mm per lens. There are two removable foam discs provided to change the internal base lens height to 97mm instead of the 120mm when needed. This case is the maximum approved size for airline carry on travel.
Read More
The iSeries 20118LENS case is the perfect companion case for the professional photographer. This case will hold six lenses such as the Canon Cinema Prime Lenses or Schneider Kreunznach Xenon FF Prime Lenses. Each lens slot has a diameter of 125mm and the base depth of each lens slot is a total of 120mm. The useable lid depth is 35mm creating a maximum length of 155mm per lens. There are two removable foam discs provided to change the internal base lens height to 97mm instead of the 120mm when needed. This case is the maximum approved size for airline carry on travel.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810G), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).
Prop65 Information
This product can expose you to chemicals including chloroprene, which is known to the State of California to cause cancer. For more information go to p65warnings.ca.gov
- Custom cut PE foam to fit six lenses 125mm in diameter
- Removable foam discs for longer lenses
- Unconditional Lifetime Warranty
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD 810G)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD 810G)
- Automatic ambient pressure equalization valve (MIL-STD 810G)
- Resistant to corrosion and impact damage
- Molded-in hinges
- Rubber over-molded cushion grip handle
- Locking loops for a customer supplied lock
- Patented "trigger release" latch system
Exterior
Hard
Product Weight
9.57 lb
4.34 kg
Exterior Length
22 in
55.88 cm
Exterior Width
14 in
35.56 cm
Exterior Height
9 in
22.86 cm
Carton Length
22.5 in
57.15 cm
Carton Width
14.5 in
36.83 cm
Carton Height
9.5 in
24.13 cm
Shipping Weight
10.84 lb
4.92 kg
Cases with our Five Year Warranty are warranted for five (5) years to the original owner against defects in materials and craftsmanship. Any defects in workmanship will be covered by SKB. Damages due to accident, improper care, negligence or normal wear, where SKB is not at fault, are not covered. Freight cost to SKB Corporation is the responsibility of the customer. SKB will pay the return freight for warranty product shipped back to the customer.
Chart of all SKB iSeries products and its dimensions.
Yes. Minimum quantities are required. Submit a quote request here.
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. To register your case, fill out the form here.
Most latches, handles, and wheels are considered field replaceable, and can be provided at no charge to the original owner. If you need parts, contact our customer service department:
By phone: (714) 685-5207
By email: customerservice@skbcases.com
Online: Support Request form
Most repairs can be completed within two weeks of receiving your case.
Some cases can be retrofitted with TSA latches. Please contact our customer service department at (714) 685-5207 or customerservice@skbcases.com for more information.
Proudly Made in the USA
SKB iSeries Cases are molded from a proprietary blend of ultra high-strength polypropylene copolymer resin that makes them both lighter and 2.8x stronger than the competition. Every iSeries case is designed, manufactured, assembled, and finished at our factory in Orange, California—and has been since the beginning. It's this unsurpassed commitment to quality and innovation that makes SKB Cases the gold industry standard for military-grade protective cases.