Added To Cart
Model: 3i-201510AX1
The iSeries 201510AX1 Case (3i-201510AX1) features a custom cut interior for the Sony FDR-AX1, PXW-Z100, HDR-FX1000, HVR-Z5U, HDR-AX2000, HXR-NX5U, or HXR-NX3. The custom interior is designed to accommodate the video camera with space for batteries, memory cards and a large accessory pocket that can fit an additional shotgun microphone or other accessories.
Read More
The iSeries 201510AX1 Case (3i-201510AX1) features a custom cut interior for the Sony FDR-AX1, PXW-Z100, HDR-FX1000, HVR-Z5U, HDR-AX2000, HXR-NX5U, or HXR-NX3. The custom interior is designed to accommodate the video camera with space for batteries, memory cards and a large accessory pocket that can fit an additional shotgun microphone or other accessories.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810G), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).
Prop65 Information
This product can expose you to chemicals including chloroprene, which is known to the State of California to cause cancer. For more information go to p65warnings.ca.gov
- Custom cut PE foam to fit Sony FDR-AX1, PXW-Z100, HDR-FX1000, HVR-Z5U, HDR-AX2000, HXR-NX5U, or HXR-NX3 video camera
- Compartments for batteries, memory cards and shotgun mix and accessories
- Unconditional Lifetime Warranty
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD 810G)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD 810G)
- Automatic ambient pressure equalization value (MIL-STD 810G)
- Resistant to corrosion and impact damage
- Molded-in hinge
- Rubber over-molded cushion grip handle
- Locking loops for a customer supplied lock
- Patented "trigger release" latch system
- Convenient wheels and pull handle
Exterior
Hard
Built In Wheels or Casters
Yes
Product Weight
16.63 lb
7.54 kg
Exterior Length
23 in
58.42 cm
Exterior Width
18 in
45.72 cm
Exterior Height
11.5 in
29.21 cm
Carton Length
23.5 in
59.69 cm
Carton Width
18.5 in
46.99 cm
Carton Height
12 in
30.48 cm
Shipping Weight
18.55 lb
8.41 kg
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases that have been modified, previously owned, or used for rental purposes by institutions or schools are not covered by this warranty.
Chart of all SKB iSeries products and its dimensions.
Yes. Minimum quantities are required. Submit a quote request here.
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. To register your case, fill out the form here.
Most latches, handles, and wheels are considered field replaceable, and can be provided at no charge to the original owner. If you need parts, contact our customer service department:
By phone: (714) 685-5207
By email: customerservice@skbcases.com
Online: Support Request form
Most repairs can be completed within two weeks of receiving your case.
Some cases can be retrofitted with TSA latches. Please contact our customer service department at (714) 685-5207 or customerservice@skbcases.com for more information.
Model: 3i-201510AX1
The iSeries 201510AX1 Case (3i-201510AX1) features a custom cut interior for the Sony FDR-AX1, PXW-Z100, HDR-FX1000, HVR-Z5U, HDR-AX2000, HXR-NX5U, or HXR-NX3. The custom interior is designed to accommodate the video camera with space for batteries, memory cards and a large accessory pocket that can fit an additional shotgun microphone or other accessories.
Read More
The iSeries 201510AX1 Case (3i-201510AX1) features a custom cut interior for the Sony FDR-AX1, PXW-Z100, HDR-FX1000, HVR-Z5U, HDR-AX2000, HXR-NX5U, or HXR-NX3. The custom interior is designed to accommodate the video camera with space for batteries, memory cards and a large accessory pocket that can fit an additional shotgun microphone or other accessories.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810G), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).
Prop65 Information
This product can expose you to chemicals including chloroprene, which is known to the State of California to cause cancer. For more information go to p65warnings.ca.gov
- Custom cut PE foam to fit Sony FDR-AX1, PXW-Z100, HDR-FX1000, HVR-Z5U, HDR-AX2000, HXR-NX5U, or HXR-NX3 video camera
- Compartments for batteries, memory cards and shotgun mix and accessories
- Unconditional Lifetime Warranty
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD 810G)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD 810G)
- Automatic ambient pressure equalization value (MIL-STD 810G)
- Resistant to corrosion and impact damage
- Molded-in hinge
- Rubber over-molded cushion grip handle
- Locking loops for a customer supplied lock
- Patented "trigger release" latch system
- Convenient wheels and pull handle
Exterior
Hard
Built In Wheels or Casters
Yes
Product Weight
16.63 lb
7.54 kg
Exterior Length
23 in
58.42 cm
Exterior Width
18 in
45.72 cm
Exterior Height
11.5 in
29.21 cm
Carton Length
23.5 in
59.69 cm
Carton Width
18.5 in
46.99 cm
Carton Height
12 in
30.48 cm
Shipping Weight
18.55 lb
8.41 kg
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases that have been modified, previously owned, or used for rental purposes by institutions or schools are not covered by this warranty.
Chart of all SKB iSeries products and its dimensions.
Yes. Minimum quantities are required. Submit a quote request here.
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. To register your case, fill out the form here.
Most latches, handles, and wheels are considered field replaceable, and can be provided at no charge to the original owner. If you need parts, contact our customer service department:
By phone: (714) 685-5207
By email: customerservice@skbcases.com
Online: Support Request form
Most repairs can be completed within two weeks of receiving your case.
Some cases can be retrofitted with TSA latches. Please contact our customer service department at (714) 685-5207 or customerservice@skbcases.com for more information.
Proudly Made in the USA
SKB iSeries Cases are molded from a proprietary blend of ultra high-strength polypropylene copolymer resin that makes them both lighter and 2.8x stronger than the competition. Every iSeries case is designed, manufactured, assembled, and finished at our factory in Orange, California—and has been since the beginning. It's this unsurpassed commitment to quality and innovation that makes SKB Cases the gold industry standard for military-grade protective cases.