Added To Cart
Model: 3i-2015-7DMP
The iSeries 3i-2015-7DMP Multi Pad Case is designed to accommodate newer models of Drum Multi Pads like the Roland SPD-SX with the bracket attached. The interior is created with a custom-cut high quality PE foam that will hold the unit as well as a pair of sticks and the power supply. The iSeries 2015-7DMP Multi Pad Case, (3i-2015-7DMP) This custom waterproof case is made in the USA and is backed by SKB's Unconditional Lifetime Warranty.
Read More
The iSeries 3i-2015-7DMP Multi Pad Case is designed to accommodate newer models of Drum Multi Pads like the Roland SPD-SX with the bracket attached. The interior is created with a custom-cut high quality PE foam that will hold the unit as well as a pair of sticks and the power supply. The iSeries 2015-7DMP Multi Pad Case, (3i-2015-7DMP) This custom waterproof case is made in the USA and is backed by SKB's Unconditional Lifetime Warranty.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810G), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).
Prop65 Information
This product can expose you to chemicals including chloroprene, which is known to the State of California to cause cancer. For more information go to p65warnings.ca.gov
- Custom cut interior
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD 810G)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD 810G)
- Automatic ambient pressure equalization value (MIL-STD 810G)
- Resistant to corrosion and impact damage
- Molded-in hinge
- Trigger release latch system
- Stainless steel locking loops
- Accepts SKB's TSA Padlocks
- Rubber over-molded cushion grip handle
- Custom cut foam interior
- Lifetime Warranty
Exterior
Hard
Interior Lid Depth
2 in
5.08 cm
Interior Base Depth
5.5 in
13.97 cm
Interior Depth
7.5 in
19.05 cm
Product Weight
10.84 lb
4.92 kg
Exterior Length
22.375 in
56.83 cm
Exterior Width
18 in
45.72 cm
Exterior Height
8.375 in
21.27 cm
Carton Length
23 in
58.42 cm
Carton Width
18.5 in
46.99 cm
Carton Height
9 in
22.86 cm
Shipping Weight
12.39 lb
5.62 kg
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases that have been modified, previously owned, or used for rental purposes by institutions or schools are not covered by this warranty.
Chart of all SKB iSeries products and its dimensions.
Yes. Minimum quantities are required. Submit a quote request here.
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. To register your case, fill out the form here.
Most latches, handles, and wheels are considered field replaceable, and can be provided at no charge to the original owner. If you need parts, contact our customer service department:
By phone: (714) 685-5207
By email: customerservice@skbcases.com
Online: Support Request form
Most repairs can be completed within two weeks of receiving your case.
Some cases can be retrofitted with TSA latches. Please contact our customer service department at (714) 685-5207 or customerservice@skbcases.com for more information.
Model: 3i-2015-7DMP
The iSeries 3i-2015-7DMP Multi Pad Case is designed to accommodate newer models of Drum Multi Pads like the Roland SPD-SX with the bracket attached. The interior is created with a custom-cut high quality PE foam that will hold the unit as well as a pair of sticks and the power supply. The iSeries 2015-7DMP Multi Pad Case, (3i-2015-7DMP) This custom waterproof case is made in the USA and is backed by SKB's Unconditional Lifetime Warranty.
Read More
The iSeries 3i-2015-7DMP Multi Pad Case is designed to accommodate newer models of Drum Multi Pads like the Roland SPD-SX with the bracket attached. The interior is created with a custom-cut high quality PE foam that will hold the unit as well as a pair of sticks and the power supply. The iSeries 2015-7DMP Multi Pad Case, (3i-2015-7DMP) This custom waterproof case is made in the USA and is backed by SKB's Unconditional Lifetime Warranty.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810G), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).
Prop65 Information
This product can expose you to chemicals including chloroprene, which is known to the State of California to cause cancer. For more information go to p65warnings.ca.gov
- Custom cut interior
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD 810G)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD 810G)
- Automatic ambient pressure equalization value (MIL-STD 810G)
- Resistant to corrosion and impact damage
- Molded-in hinge
- Trigger release latch system
- Stainless steel locking loops
- Accepts SKB's TSA Padlocks
- Rubber over-molded cushion grip handle
- Custom cut foam interior
- Lifetime Warranty
Exterior
Hard
Interior Lid Depth
2 in
5.08 cm
Interior Base Depth
5.5 in
13.97 cm
Interior Depth
7.5 in
19.05 cm
Product Weight
10.84 lb
4.92 kg
Exterior Length
22.375 in
56.83 cm
Exterior Width
18 in
45.72 cm
Exterior Height
8.375 in
21.27 cm
Carton Length
23 in
58.42 cm
Carton Width
18.5 in
46.99 cm
Carton Height
9 in
22.86 cm
Shipping Weight
12.39 lb
5.62 kg
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases that have been modified, previously owned, or used for rental purposes by institutions or schools are not covered by this warranty.
Chart of all SKB iSeries products and its dimensions.
Yes. Minimum quantities are required. Submit a quote request here.
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. To register your case, fill out the form here.
Most latches, handles, and wheels are considered field replaceable, and can be provided at no charge to the original owner. If you need parts, contact our customer service department:
By phone: (714) 685-5207
By email: customerservice@skbcases.com
Online: Support Request form
Most repairs can be completed within two weeks of receiving your case.
Some cases can be retrofitted with TSA latches. Please contact our customer service department at (714) 685-5207 or customerservice@skbcases.com for more information.
Proudly Made in the USA
SKB iSeries Cases are molded from a proprietary blend of ultra high-strength polypropylene copolymer resin that makes them both lighter and 2.8x stronger than the competition. Every iSeries case is designed, manufactured, assembled, and finished at our factory in Orange, California—and has been since the beginning. It's this unsurpassed commitment to quality and innovation that makes SKB Cases the gold industry standard for military-grade protective cases.