Model: 3i1813-7-RP2
$259.99
Featuring high quality form-cut PE foam designed specifically to house the RODECaster Pro II Production Console, the 3i1813-7-RP2 case interior also includes a main removable pocket for two Rode PodMics as well as two additional accessory pockets. If the PodMic cutout is not needed, the custom foam can be removed to provide an open cavity for additional storage. The main compartment measures 16.25" x 5" x 4" without the custom foam PodMic insert. The smaller compartments measure 9.25" x 2" x 4.25" and 9.125" x 2" x 2.75".
Read More
Featuring high quality form-cut PE foam designed specifically to house the RODECaster Pro II Production Console, the 3i1813-7-RP2 case interior also includes a main removable pocket for two Rode PodMics as well as two additional accessory pockets. If the PodMic cutout is not needed, the custom foam can be removed to provide an open cavity for additional storage. The main compartment measures 16.25" x 5" x 4" without the custom foam PodMic insert. The smaller compartments measure 9.25" x 2" x 4.25" and 9.125" x 2" x 2.75".
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
Prop65 Information
This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer and birth defects or other reproductive harm. To understand why we must make this statement please click on the Prop 65 tab above. For more information on Prop 65, go to www.P65Warnings.ca.gov.
- Accommodates the RODECaster Pro II Production Console
- Removable foam insert below mixer holds two Rode PodMics
- Two accessory compartments below mixer
- Waterproof dust-tight design (MIL-STD 810H)
- Molded-in hinge for added protection
- Trigger Latch® System
- Snap-down rubber over-molded cushion grip handle
- Ambient pressure equalization valve(MIL-STD 810H)
- Resistant to UV, solvents, corrosion, fungus, and impact damage (MIL-STD 810H)
Exterior
Hard
Product Weight
9.2 lb
4.17 kg
Exterior Length
19.875 in
50.48 cm
Exterior Width
15.5 in
39.37 cm
Exterior Height
7.875 in
20.00 cm
Carton Length
20 in
50.80 cm
Carton Width
16 in
40.64 cm
Carton Height
8 in
20.32 cm
Shipping Weight
10.4 lb
4.72 kg
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases that have been modified, previously owned, or used for rental purposes by institutions or schools are not covered by this warranty.
Chart of all SKB iSeries products and their dimensions.
Yes. Minimum quantities are required. Submit a quote request here.
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. To register your case, fill out the form here.
Most latches, handles, and wheels are considered field replaceable, and can be provided at no charge to the original owner. If you need parts, contact our customer service department:
By phone: (714) 685-5207
By email: customerservice@skbcases.com
Online: Support Request form
Most repairs can be completed within two weeks of receiving your case.
Some cases can be retrofitted with TSA latches. Please contact our customer service department at (714) 685-5207 or customerservice@skbcases.com for more information.
You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.
For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.
SKB has been making cases since 1977. We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us at caprop65@skbcases.com
Model: 3i1813-7-RP2
$259.99
Featuring high quality form-cut PE foam designed specifically to house the RODECaster Pro II Production Console, the 3i1813-7-RP2 case interior also includes a main removable pocket for two Rode PodMics as well as two additional accessory pockets. If the PodMic cutout is not needed, the custom foam can be removed to provide an open cavity for additional storage. The main compartment measures 16.25" x 5" x 4" without the custom foam PodMic insert. The smaller compartments measure 9.25" x 2" x 4.25" and 9.125" x 2" x 2.75".
Read More
Featuring high quality form-cut PE foam designed specifically to house the RODECaster Pro II Production Console, the 3i1813-7-RP2 case interior also includes a main removable pocket for two Rode PodMics as well as two additional accessory pockets. If the PodMic cutout is not needed, the custom foam can be removed to provide an open cavity for additional storage. The main compartment measures 16.25" x 5" x 4" without the custom foam PodMic insert. The smaller compartments measure 9.25" x 2" x 4.25" and 9.125" x 2" x 2.75".
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
Prop65 Information
This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer and birth defects or other reproductive harm. To understand why we must make this statement please click on the Prop 65 tab above. For more information on Prop 65, go to www.P65Warnings.ca.gov.
- Accommodates the RODECaster Pro II Production Console
- Removable foam insert below mixer holds two Rode PodMics
- Two accessory compartments below mixer
- Waterproof dust-tight design (MIL-STD 810H)
- Molded-in hinge for added protection
- Trigger Latch® System
- Snap-down rubber over-molded cushion grip handle
- Ambient pressure equalization valve(MIL-STD 810H)
- Resistant to UV, solvents, corrosion, fungus, and impact damage (MIL-STD 810H)
Exterior
Hard
Product Weight
9.2 lb
4.17 kg
Exterior Length
19.875 in
50.48 cm
Exterior Width
15.5 in
39.37 cm
Exterior Height
7.875 in
20.00 cm
Carton Length
20 in
50.80 cm
Carton Width
16 in
40.64 cm
Carton Height
8 in
20.32 cm
Shipping Weight
10.4 lb
4.72 kg
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases that have been modified, previously owned, or used for rental purposes by institutions or schools are not covered by this warranty.
Chart of all SKB iSeries products and their dimensions.
Yes. Minimum quantities are required. Submit a quote request here.
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. To register your case, fill out the form here.
Most latches, handles, and wheels are considered field replaceable, and can be provided at no charge to the original owner. If you need parts, contact our customer service department:
By phone: (714) 685-5207
By email: customerservice@skbcases.com
Online: Support Request form
Most repairs can be completed within two weeks of receiving your case.
Some cases can be retrofitted with TSA latches. Please contact our customer service department at (714) 685-5207 or customerservice@skbcases.com for more information.
You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.
For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.
SKB has been making cases since 1977. We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us at caprop65@skbcases.com