Added To Cart
Model: 1SKB-R8UW
Available in 4U, 6U, and 8U sizes, SKB Roto Rolling Racks are roto-molded of Polyethylene (LLDPE) for extra strength and durability.
Read More
Available in 4U, 6U, and 8U sizes, SKB Roto Rolling Racks are roto-molded of Polyethylene (LLDPE) for extra strength and durability.
These racks incorporate our one-touch pull handle and back lid mounted wheels to improve ease of transport and help eliminate heavy lifting and carrying. The exteriors feature SKB's recognizable bar design that signifies the rack unit size on the front and rear lids. Molded bars on top and bottom also provide interlocking capabilities allowing you to easily and securely stack them with SKB's Shallow Racks and Standard Roto Racks, making transport even more convenient and secure. Lids include rubber gasket seals to keep water out. Other standard features include front and rear steel threaded rails and rack screws (10-32 thread), recessed steel Mil-Spec twist latches, flush carry handles, and non-slip rubber feet. All Roto Rolling Racks are 17.6" deep from front rail to rear rail.
Prop65 Information
This product can expose you to chemicals including chloroprene, which is known to the State of California to cause cancer. For more information go to p65warnings.ca.gov
- Roto molded of Linear Low Density Polyethylene (LLDPE) for maximum strength & impact resistance
- Available in 4U, 6U, & 8U sizes
- Interlocking molded stacking bars
- Gasket-sealed waterproof front & rear lids
- Recessed twist latches
- Heavy-duty flush mount handles
- One-touch pull handle & integrated back lid wheels
- Non-slip rubber feet
- Includes rackmount screws
- Optional Roto Caster Board available (1SKB-RCB)
- Unconditional Lifetime Warranty
Exterior
Hard
Built In Wheels or Casters
Yes
Rack Units
8
Front Rail To Back Lid
20.25 in
51.44 cm
Rail To Rail
17.5 in
44.45 cm
Rear Rail to Front Lid
19.875 in
50.48 cm
Product Weight
28.64 lb
12.99 kg
Exterior Length
26.75 in
67.95 cm
Exterior Width
22.5 in
57.15 cm
Exterior Height
18.5 in
46.99 cm
Carton Length
27 in
68.58 cm
Carton Width
23 in
58.42 cm
Carton Height
19 in
48.26 cm
Shipping Weight
31.96 lb
14.49 kg
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases that have been modified, previously owned, or used for rental purposes by institutions or schools are not covered by this warranty.
Here you can access relevant product downloads like dimensional drawings, series information, and more.
Yes. Minimum quantities are required. Submit a quote request here.
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. To register your case, fill out the form here.
Most latches, handles, and wheels are considered field replaceable, and can be provided at no charge to the original owner. If you need parts, contact our customer service department:
By phone: (714) 685-5207
By email: customerservice@skbcases.com
Online: Support Request form
Most repairs can be completed within two weeks of receiving your case.
Some cases can be retrofitted with TSA latches. Please contact our customer service department at (714) 685-5207 or customerservice@skbcases.com for more information.
Model: 1SKB-R8UW
Available in 4U, 6U, and 8U sizes, SKB Roto Rolling Racks are roto-molded of Polyethylene (LLDPE) for extra strength and durability.
Read More
Available in 4U, 6U, and 8U sizes, SKB Roto Rolling Racks are roto-molded of Polyethylene (LLDPE) for extra strength and durability.
These racks incorporate our one-touch pull handle and back lid mounted wheels to improve ease of transport and help eliminate heavy lifting and carrying. The exteriors feature SKB's recognizable bar design that signifies the rack unit size on the front and rear lids. Molded bars on top and bottom also provide interlocking capabilities allowing you to easily and securely stack them with SKB's Shallow Racks and Standard Roto Racks, making transport even more convenient and secure. Lids include rubber gasket seals to keep water out. Other standard features include front and rear steel threaded rails and rack screws (10-32 thread), recessed steel Mil-Spec twist latches, flush carry handles, and non-slip rubber feet. All Roto Rolling Racks are 17.6" deep from front rail to rear rail.
Prop65 Information
This product can expose you to chemicals including chloroprene, which is known to the State of California to cause cancer. For more information go to p65warnings.ca.gov
- Roto molded of Linear Low Density Polyethylene (LLDPE) for maximum strength & impact resistance
- Available in 4U, 6U, & 8U sizes
- Interlocking molded stacking bars
- Gasket-sealed waterproof front & rear lids
- Recessed twist latches
- Heavy-duty flush mount handles
- One-touch pull handle & integrated back lid wheels
- Non-slip rubber feet
- Includes rackmount screws
- Optional Roto Caster Board available (1SKB-RCB)
- Unconditional Lifetime Warranty
Exterior
Hard
Built In Wheels or Casters
Yes
Rack Units
8
Front Rail To Back Lid
20.25 in
51.44 cm
Rail To Rail
17.5 in
44.45 cm
Rear Rail to Front Lid
19.875 in
50.48 cm
Product Weight
28.64 lb
12.99 kg
Exterior Length
26.75 in
67.95 cm
Exterior Width
22.5 in
57.15 cm
Exterior Height
18.5 in
46.99 cm
Carton Length
27 in
68.58 cm
Carton Width
23 in
58.42 cm
Carton Height
19 in
48.26 cm
Shipping Weight
31.96 lb
14.49 kg
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases that have been modified, previously owned, or used for rental purposes by institutions or schools are not covered by this warranty.
Here you can access relevant product downloads like dimensional drawings, series information, and more.
Yes. Minimum quantities are required. Submit a quote request here.
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. To register your case, fill out the form here.
Most latches, handles, and wheels are considered field replaceable, and can be provided at no charge to the original owner. If you need parts, contact our customer service department:
By phone: (714) 685-5207
By email: customerservice@skbcases.com
Online: Support Request form
Most repairs can be completed within two weeks of receiving your case.
Some cases can be retrofitted with TSA latches. Please contact our customer service department at (714) 685-5207 or customerservice@skbcases.com for more information.